Modulate using rectangular QAM signal constellation
The RectangularQAMModulator object modulates using M-ary quadrature amplitude modulation with a constellation on a rectangular lattice. The output is a baseband representation of the modulated signal. This block accepts a scalar or column vector input signal.
To modulate a signal using quadrature amplitude modulation:
H = comm.RectangularQAMModulator creates a modulator object, H. This object modulates the input using the rectangular quadrature amplitude modulation (QAM) method.
H = comm.RectangularQAMModulator(Name,Value) creates a rectangular QAM modulator object, H, with each specified property set to the specified value. You can specify additional name-value pair arguments in any order as (Name1,Value1,...,NameN,ValueN).
H = comm.RectangularQAMModulator(M,Name,Value) creates a rectangular QAM modulator object, H. This object has the ModulationOrder property set to M, and the other specified properties set to the specified values.
Number of points in signal constellation
Specify the number of points in the signal constellation as scalar value that is a positive integer power of two. The default is 16.
Phase offset of constellation
Specify the phase offset of the signal constellation, in radians, as a real scalar value. The default is 0.
Assume bit inputs
Specify whether the input is bits or integers. The default is false. When you set this property to true, the step method input requires a column vector of bit values. The length of this vector must an integer multiple of log2(ModulationOrder). This vector contains bit representations of integers between 0 and ModulationOrder–1. When you set this property to false, the step method input must be a column vector of integer symbol values between 0 and ModulationOrder–1.
Specify how the object maps an integer or group of log2(ModulationOrder) input bits to the corresponding symbol as Binary | Gray | Custom. The default is Gray. When you set this property to Gray, the System object™ uses a Gray-coded signal constellation. When you set this property to Binary, the object uses a natural binary-coded constellation. When you set this property to Custom, the object uses the signal constellation defined in the CustomSymbolMapping property.
Custom constellation encoding
Specify a custom constellation symbol mapping vector. The default is 0:15. This property is a row or column vector with a size of ModulationOrder. This vector has unique integer values in the range [0, ModulationOrder–1]. These values must be of data type double. The first element of this vector corresponds to the top-leftmost point of the constellation, with subsequent elements running down column-wise, from left to right. The last element corresponds to the bottom-rightmost point. This property applies when you set the SymbolMapping property to Custom.
Constellation normalization method
Specify the method used to normalize the signal constellation as Minimum distance between symbols | Average power | Peak power. The default is Minimum distance between symbols.
Minimum distance between symbols
Specify the distance between two nearest constellation points as a positive, real, numeric scalar value. The default is 2. This property applies when you set the NormalizationMethod property to Minimum distance between symbols.
Average power of constellation
Specify the average power of the symbols in the constellation as a positive, real, numeric scalar value. The default is 1. This property applies when you set the NormalizationMethod property to Average power.
Peak power of constellation
Specify the maximum power of the symbols in the constellation as a positive real, numeric scalar value. The default is 1. This property applies when you set the NormalizationMethod property to Peak power.
Data type of output
Specify the output data type as double | single | Custom. The default is double.
|clone||Create rectangular QAM modulator object with same property values|
|constellation||Calculate or plot ideal signal constellation|
|getNumInputs||Number of expected inputs to step method|
|getNumOutputs||Number of outputs from step method|
|isLocked||Locked status for input attributes and nontunable properties|
|release||Allow property value and input characteristics changes|
|step||Modulate using rectangular QAM method|
This example shows how to modulate binary data with a 64-QAM System object and to view the resultant constellation.
Generate random binary data. As there are 6 bits/symbol in 64-QAM, the number of bits input to the modulator must be a multiple of 6.
data = randi([0 1],6000,1);
Create a 64-QAM modulator object that accepts binary input.
hMod = comm.RectangularQAMModulator('ModulationOrder',64,'BitInput',true);
Modulate the data using the step function.
dataMod = step(hMod,data);
Plot the modulated data using the scatterplot function.
This object implements the algorithm, inputs, and outputs described on the Rectangular QAM Modulator Baseband block reference page. The object properties correspond to the block parameters.