Ideal source of mechanical energy that generates force proportional to the input signal
The Ideal Force Source block represents an ideal source of mechanical energy that generates force proportional to the input physical signal. The source is ideal in a sense that it is assumed to be powerful enough to maintain specified force at its output regardless of the velocity at source terminals.
Connections R and C are mechanical translational conserving ports. Port S is a physical signal port, through which the control signal that drives the source is applied. You can use the entire variety of Simulink® signal sources to generate the desired force variation profile. Positive signal at port S generates force acting from C to R. The force generated by the source is directly proportional to the signal at the control port S.
The block positive direction is from port C to port R. This
means that the force is positive if it acts in the direction from
C to R. The relative velocity is determined as
the absolute velocities at ports R and C, respectively, and it is
negative if velocity at port R is greater than that at port C. The
power generated by the source is negative if the source delivers energy
to port R.
The block has no parameters.
The block has the following ports:
Mechanical translational conserving port.
Mechanical translational conserving port associated with the source reference point (case).
Physical signal input port, through which the control signal that drives the source is applied.