|On this page…|
The Level-2 MATLAB® S-function API allows you to use the MATLAB language to create custom blocks with multiple input and output ports and capable of handling any type of signal produced by a Simulink® model, including matrix and frame signals of any data type. The Level-2 MATLAB S-function API corresponds closely to the API for creating C MEX S-functions. Much of the documentation for creating C MEX S-functions applies also to Level-2 MATLAB S-functions. To avoid duplication, this section focuses on providing information that is specific to writing Level-2 MATLAB S-functions.
A Level-2 MATLAB S-function is MATLAB function that defines the properties and behavior of an instance of a Level-2 MATLAB S-Function block that references the MATLAB function in a Simulink model. The MATLAB function itself comprises a set of callback methods (see Level-2 MATLAB S-Function Callback Methods) that the Simulink engine invokes when updating or simulating the model. The callback methods perform the actual work of initializing and computing the outputs of the block defined by the S-function.
To facilitate these tasks, the engine passes a run-time object to the callback methods as an argument. The run-time object effectively serves as a MATLAB proxy for the S-Function block, allowing the callback methods to set and access the block properties during simulation or model updating.
When the Simulink engine invokes a Level-2 MATLAB S-function callback method, it passes an instance of the Simulink.MSFcnRunTimeBlock class to the method as an argument. This instance, known as the run-time object for the S-Function block, serves the same purpose for Level-2 MATLAB S-function callback methods as the SimStruct structure serves for C MEX S-function callback methods. The object enables the method to provide and obtain information about various elements of the block ports, parameters, states, and work vectors. The method does this by getting or setting properties or invoking methods of the block run-time object. See the documentation for the Simulink.MSFcnRunTimeBlock class for information on getting and setting run-time object properties and invoking run-time object methods.
block.Outport(1).Data = speye(10);
where the speye command forms a sparse identity matrix.
Note Other MATLAB programs besides MATLAB S-functions can use run-time objects to obtain information about a MATLAB S-function in a model that is simulating. See Access Block Data During Simulation in Using Simulink for more information.
Use the basic Level-2 MATLAB S-function template msfuntmpl_basic.mmsfuntmpl_basic.m to get a head start on creating a new Level-2 MATLAB S-function. The template contains skeleton implementations of the required callback methods defined by the Level-2 MATLAB S-function API. To write a more complicated S-function, use the annotated template msfuntmpl.mmsfuntmpl.m.
To create a MATLAB S-function, make a copy of the template and edit the copy as necessary to reflect the desired behavior of the S-function you are creating. The following two sections describe the contents of the MATLAB code template. The section Example of Writing a Level-2 MATLAB S-Function describes how to write a Level-2 MATLAB S-function that models a unit delay.
The Level-2 MATLAB S-function API defines the signatures and general purposes of the callback methods that constitute a Level-2 MATLAB S-function. The S-function itself provides the implementations of these callback methods. The implementations in turn determine the block attributes (e.g., ports, parameters, and states) and behavior (e.g., the block outputs as a function of time and the block inputs, states, and parameters). By creating an S-function with an appropriate set of callback methods, you can define a block type that meets the specific requirements of your application.
A Level-2 MATLAB S-function must include the following callback methods:
A setup function to initialize the basic S-function characteristics
An Outputs function to calculate the S-function outputs
Your S-function can contain other methods, depending on the requirements of the block that the S-function defines. The methods defined by the Level-2 MATLAB S-function API generally correspond to similarly named methods defined by the C MEX S-function API. For information on when these methods are called during simulation, see Process View in Simulink Engine Interaction with C S-Functions. For instructions on how to implement each callback method, see Write Callback Methods.
The following table lists all the Level-2 MATLAB S-function callback methods and their C MEX counterparts.
|Level-2 MATLAB Method||Equivalent C MEX Method|
|setup (see Using the setup Method)||mdlInitializeSizes|
The body of the setup method in a Level-2 MATLAB S-function initializes the instance of the corresponding Level-2 MATLAB S-Function block. In this respect, the setup method is similar to the mdlInitializeSizes and mdlInitializeSampleTimes callback methods implemented by C MEX S-functions. The setup method performs the following tasks:
Initializing the number of input and output ports of the block.
Setting attributes such as dimensions, data types, complexity, and sample times for these ports.
Specifying the block sample time. See Specify Sample Time in Using Simulink for more information on how to specify valid sample times.
Setting the number of S-function dialog parameters.
Registering S-function callback methods by passing the handles of local functions in the MATLAB S-function to the RegBlockMethod method of the S-Function block's run-time object. See the documentation for Simulink.MSFcnRunTimeBlock for information on using the RegBlockMethod method.
The following steps illustrate how to write a simple Level-2 MATLAB S-function. When applicable, the steps include examples from the S-function example msfcn_unit_delay.mmsfcn_unit_delay.m used in the model msfcndemo_sfundsc2msfcndemo_sfundsc2. All lines of code use the variable name block for the S-function run-time object.
Copy the Level-2 MATLAB S-function template msfuntmpl_basic.mmsfuntmpl_basic.m to your working folder. If you change the file name when you copy the file, change the function name in the function line to the same name.
Modify the setup method to initialize the S-function's attributes. For this example:
Set the run-time object's NumInputPorts and NumOutputPorts properties to 1 in order to initialize one input port and one output port.
Invoke the run-time object's SetPreCompInpPortInfoToDynamic and SetPreCompOutPortInfoToDynamic methods to indicate that the input and output ports inherit their compiled properties (dimensions, data type, complexity, and sampling mode) from the model.
Set the DirectFeedthrough property of the run-time object's InputPort to false in order to indicate the input port does not have direct feedthrough. Retain the default values for all other input and output port properties that are set in your copy of the template file. The values set for the Dimensions, DatatypeID, and Complexity properties override the values inherited using the SetPreCompInpPortInfoToDynamic and SetPreCompOutPortInfoToDynamic methods.
Set the run-time object's NumDialogPrms property to 1 in order to initialize one S-function dialog parameter.
Specify that the S-function has an inherited sample time by setting the value of the runtime object's SampleTimes property to [-1 0].
Call the run-time object's RegBlockMethod method to register the following four callback methods used in this S-function.
Remove any other registered callback methods from your copy of the template file. In the calls to RegBlockMethod, the first input argument is the name of the S-function API method and the second input argument is the function handle to the associated local function in the MATLAB S-function.
The following setup method from msfcn_unit_delay.m performs the previous list of steps:
function setup(block) %% Register a single dialog parameter block.NumDialogPrms = 1; %% Register number of input and output ports block.NumInputPorts = 1; block.NumOutputPorts = 1; %% Setup functional port properties to dynamically %% inherited. block.SetPreCompInpPortInfoToDynamic; block.SetPreCompOutPortInfoToDynamic; %% Hard-code certain port properties block.InputPort(1).Dimensions = 1; block.InputPort(1).DirectFeedthrough = false; block.OutputPort(1).Dimensions = 1; %% Set block sample time to [0.1 0] block.SampleTimes = [0.1 0]; %% Register methods block.RegBlockMethod('PostPropagationSetup',@DoPostPropSetup); block.RegBlockMethod('InitializeConditions',@InitConditions); block.RegBlockMethod('Outputs', @Output); block.RegBlockMethod('Update', @Update);
If your S-function needs continuous states, initialize the number of continuous states in the setup method using the run-time object's NumContStates property. Do not initialize discrete states in the setup method.
Initialize the discrete states in the PostPropagationSetup method. A Level-2 MATLAB S-function stores discrete state information in a DWork vector. The default PostPropagationSetup method in the template file suffices for this example.
The following PostPropagationSetup method from msfcn_unit_delay.m, named DoPostPropSetup, initializes one DWork vector with the name x0.
function DoPostPropSetup(block) %% Setup Dwork block.NumDworks = 1; block.Dwork(1).Name = 'x0'; block.Dwork(1).Dimensions = 1; block.Dwork(1).DatatypeID = 0; block.Dwork(1).Complexity = 'Real'; block.Dwork(1).UsedAsDiscState = true;
If your S-function uses additional DWork vectors, initialize them in the PostPropagationSetup method, as well (see Using DWork Vectors in Level-2 MATLAB S-Functions).
Initialize the values of discrete and continuous states or other DWork vectors in the InitializeConditions or Start callback methods. Use the Start callback method for values that are initialized once at the beginning of the simulation. Use the InitializeConditions method for values that need to be reinitialized whenever an enabled subsystem containing the S-function is reenabled.
For this example, use the InitializeConditions method to set the discrete state's initial condition to the value of the S-function's dialog parameter. For example, the InitializeConditions method in msfcn_unit_delay.m is:
function InitConditions(block) %% Initialize Dwork block.Dwork(1).Data = block.DialogPrm(1).Data;
For S-functions with continuous states, use the ContStates run-time object method to initialize the continuous state date. For example:
block.ContStates.Data(1) = 1.0;
Calculate the S-function's outputs in the Outputs callback method. For this example, set the output to the current value of the discrete state stored in the DWork vector.
The Outputs method in msfcn_unit_delay.m is:
function Output(block) block.OutputPort(1).Data = block.Dwork(1).Data;
For an S-function with continuous states, calculate the state derivatives in the Derivatives callback method. Run-time objects store derivative data in their Derivatives property. For example, the following line sets the first state derivative equal to the value of the first input signal.
block.Derivatives(1).Data = block.InputPort(1).Data;
This example does not use continuous states and, therefore, does not implement the Derivatives callback method.
Update any discrete states in the Update callback method. For this example, set the value of the discrete state to the current value of the first input signal.
The Update method in msfcn_unit_delay.m is:
function Update(block) block.Dwork(1).Data = block.InputPort(1).Data;
Perform any cleanup, such as clearing variables or memory, in the Terminate method. Unlike C MEX S-functions, Level-2 MATLAB S-function are not required to have a Terminate method.
For information on additional callback methods, see Level-2 MATLAB S-Function Callback Methods. For a list of run-time object properties, see the reference page for Simulink.MSFcnRunTimeBlock and the parent class Simulink.RunTimeBlock.
To use a Level-2 MATLAB S-function in a model, copy an instance of the Level-2 MATLAB S-Functionblock into the model. Open the Block Parameters dialog box for the block and enter the name of the MATLAB file that implements your S-function into the S-function name field. If your S-function uses any additional parameters, enter the parameter values as a comma-separated list in the Block Parameters dialog box Parameters field.
function setup(block) % Register the properties of the output port block.OutputPort(1).DimensionsMode = 'Variable'; block.RegBlockMethod('SetInputPortDimensionsMode', @SetInputDimsMode); function DoPostPropSetup(block) %Register dependency rules to update current output size of output port a depending on %input ports b and c block.AddOutputDimsDependencyRules(a, [b c], @setOutputVarDims); %Configure output port b to have the same dimensions as input port a block.InputPortSameDimsAsOutputPort(a,b); %Configure DWork a to have its size reset when input size changes. block.DWorkRequireResetForSignalSize(a,true); function SetInputDimsMode(block, port, dm) % Set dimension mode block.InputPort(port).DimensionsMode = dm; block.OutputPort(port).DimensionsMode = dm; function setOutputVarDims(block, opIdx, inputIdx) % Set current (run-time) dimensions of the output outDimsAfterReset = block.InputPort(inputIdx(1)).CurrentDimensions; block.OutputPort(opIdx).CurrentDimensions = outDimsAfterReset;
Generating code for a model containing a Level-2 MATLAB S-function requires that you provide a corresponding Target Language Compiler (TLC) file. You do not need a TLC file to accelerate a model containing a Level-2 MATLAB S-function. The Simulink Accelerator™ software runs Level-2 MATLAB S-functions in interpreted mode. For more information on writing TLC files for MATLAB S-functions, see Inlining S-Functions.