Pressure & Temperature Sensor (TL)

Measure pressure and temperature differences

  • Library:
  • Simscape / Foundation Library / Thermal Liquid / Sensors

Description

The Pressure & Temperature Sensor (TL) block represents an ideal sensor that measures pressure and temperature differences between two thermal liquid nodes.

Because pressure and temperature are Across variables, the sensor block must connect in parallel with the component being measured.

The physical signal ports P and T report the pressure difference and the temperature difference, respectively, across the sensor. The measurements are positive when the values at port A are greater than the values at port B. Connect the ports to PS-Simulink Converter blocks to transform the output physical signals into Simulink® signals, for example, for plotting or additional data processing.

Ports

Output

expand all

Physical signal output port for pressure difference measurement.

Physical signal output port for temperature difference measurement.

Conserving

expand all

Thermal liquid conserving port. The measurements are positive when the values at port A are greater than the values at port B.

Thermal liquid conserving port. The measurements are positive when the values at port A are greater than the values at port B.

Model Examples

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using MATLAB® Coder™.

Introduced in R2013b