Three-Phase Series RLC Branch
Implement three-phase series RLC branch
Simscape / Electrical / Specialized Power Systems / Passives
The Three-Phase Series RLC Branch block implements three balanced branches consisting each of a resistor, an inductor, or a capacitor or a series combination of these. Use the Branch type parameter to select elements you want to include in each branch.
Negative values are allowed for resistance, inductance, and capacitance.
- Branch Type
Select the elements you want to include in the branch. The R letter defines the resistor, the L letter defines the inductor, and the C letter defines the capacitor. Select Open circuit to define an open circuit (R=0, L=0, C=inf). Only existing elements are displayed in the block icon. Default is
- Resistance R
The branch resistances, in ohms (Ω). Default is
- Inductance L
The branch inductances, in henries (H). Default is
- Capacitance C
The branch capacitances, in farads (F). Default is
Branch voltagesto measure the three voltages across the Three-Phase Series RLC Branch block terminals.
Branch currentsto measure the three currents flowing through the Three-Phase Series RLC Branch block.
Branch voltages and currentsto measure the three voltages and the three currents of the Three-Phase Series RLC Branch block.
Place a Multimeter block in your model to display the selected measurements during the simulation. In the Available Measurements list box of the Multimeter block, the measurements are identified by a label followed by the block name.