Mechanical Translational Reference
R2026bReference connection for mechanical translational ports
Mechanical Translational Reference block
To add a block to a model, double-click the canvas and start typing the block name. Then, select the block from the list.
Libraries:
Simscape /
Foundation Library /
Mechanical /
Translational Elements
Description
The Mechanical Translational Reference block represents a reference point, or frame, for mechanical translational ports. All translational ports that are rigidly clamped to the frame must be connected to a Mechanical Translational Reference block. For more information, see Grounding Rules.
Examples
Simple Mechanical System
A model of a system that connects rotational and translational motion. A summing lever drives a load consisting of a mass, viscous friction, and a spring connected to its joint C. Joint B is suspended on two rotational springs connected to reference point through a wheel and axle and a gear box. Joint A is connected to a torque source through a gear box and a wheel and axle mechanism.
Ports
Conserving
Programmatic Use: Add Block
To add the block programmatically, use the add_block function with one of these library block paths as the source.
"fl_lib/Mechanical/Translational Elements/Mechanical Translational Reference"
Example: add_block("fl_lib/Mechanical/Translational Elements/Mechanical Translational Reference","myModel/myBlock",MakeNameUnique="on")
For information about programmatic access to individual block parameters, see the Programmatic Use section of parameter descriptions on this page.
Extended Capabilities
Version History
Introduced in R2007a
