Allow tasks to execute concurrently on target
Enable concurrent tasking behavior for model.
Enable the model to be configured for concurrent tasking.
Disable the model from being configured for concurrent tasking.
If the referenced model has a single rate, you do not need to select this check box to enable concurrent tasking behavior.
This option is visible only if the Solver Type is
Fixed Step and the
Periodic sample time constraint is set to
Specified. You can toggle it in the
Additional Parameters section of the Solver
When you select this parameter check box, clicking the Configure Tasks button displays the Concurrent Execution dialog.
If you clear this parameter check box, these parameters are enabled:
Periodic sample time constraint
Treat each discrete rate as a separate task
Automatically handle rate transition for data transfer
Higher priority value indicates higher task priority