Main Content

Enable zero-crossing detection for fixed-step solver

Description

Specify whether Simulink® enables zero-crossing detection when a fixed-step solver is chosen.

Category: Solver

Settings

Default: Off

On

Specifies that zero-crossing detection has been enabled for fixed-step simulation.

Off

Specifies that zero-crossing detection is disabled for fixed-step simulation.

Dependency

This parameter is visible only if the Solver Type is set to Fixed-step and the Solver is set to a continuous solver.

Command-Line Information

Parameter: EnableFixedStepZeroCrossing
Value: 'on' | 'off'
Default: 'off'

Related Topics