Find steady-state operating points that meet specifications by trimming your Simulink® model using the Steady State Manager.
Linearize a model at the operating point specified in the model. The model operating point consists of the model initial state values and input signals.
This example shows how to use Simulink Control Design from command line.
Estimate the frequency response of a Simulink model using a manually constructed sinestream input signal.
You can tune the gains of PID Controller blocks to achieve a robust design with the desired response time using PID Tuner.
Automatically tune the parameters of a PID controller. You can then fine tune the controller performance using graphical design techniques.
Assert that linear system characteristics satisfy specified bounds using a combination of Simulink Control Design™ and Simulink verification blocks.