Voltage Measurement

Measure voltage in circuit

• 

Libraries:
Simscape / Electrical / Specialized Power Systems / Sensors and Measurements

Description

The Voltage Measurement block measures the instantaneous voltage between two electric nodes. The Simulink^® signal output provides a signal that other Simulink blocks can use.

Ports

Output

v — Instantaneous voltage measured between + and - conserving ports

scalar

Outputs the instantaneous voltage measured between the + and - conserving ports, specified as a scalar.

Conserving

+ — Positive terminal

specialized electrical

Specialized electrical conserving port associated with the positive terminal of the Voltage Measurement block.

- — Negative terminal

specialized electrical

Specialized electrical conserving port associated with the negative terminal of the Voltage Measurement block.

Parameters

Output signal — Output signal format

Complex (default) | Real-Imag | Magnitude-Angle | Magnitude

Format of the output signal to use when you use the block in a phasor simulation.

Set this parameter to Complex to output the measured current as a complex value. The output is a complex signal.

Set this parameter to Real-Imag to output the real and imaginary parts of the measured current. The output is a vector of two elements.

Set this parameter to Magnitude-Angle to output the magnitude and angle of the measured current. The output is a vector of two elements.

Set this parameter to Magnitude to output the magnitude of the measured current. The output is a scalar value.

Dependencies

To enable this parameter, set the Simulation type parameter of the powergui block to Phasor or Discrete phasor.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced before R2006a