Connect TFC Shield to the NXP FRDM-KL25Z Board

The NXP™ FRDM-TFC Shield can drive up to:

  • 2 DC motors

  • 2 servo motors

Read values from up to:

  • 2 line scan cameras

  • 2 potentiometers

  • 2 momentary switches

  • 1 four-position DIP switch

This shield should be used with the NXP FRDM-KL25Z board.

To connect the FRDM-TFC Shield to NXP FRDM-KL25Z board and to your PC:

  1. Place the FRDM-TFC Shield firmly on the NXP FRDM-KL25Z board. The FRDM-TFC Shield stacked on the FRDM-KL25Z hardware is shown in the following figure.

  2. Connect a USB cable from your computer to the OpenSDA mini-B USB connector of FRDM-KL25Z.