The Quick Control interface for RF Signal Generators joins the Quick-Control Instruments family of Quick-Control Oscilloscope and Quick-Control Function Generator. You can use this interface for simplified RF signal generator control and waveform generation.
Create the Quick-Control RF Signal Generator object using the Instrument
rfsiggen function. It provides simplified
control of signal generators and performs arbitrary waveform generation
without dealing with the underlying drivers. You can use it with RF signal
generators that use IVI-C drivers.
|Create Quick-Control RF Signal Generator object|
|Downloads arbitrary waveform to RF signal generator|
|Enables RF signal generator signal output and modulation output|
|List of available instrument resources for Quick-Control interfaces|
|List of available instrument drivers for Quick-Control interfaces|
|Connect device object to instrument|
|Disconnect device object from instrument|
Quick-Control RF Signal Generator Requirements (Instrument Control Toolbox)
You can use the Quick-Control RF Signal Generator for simplified rfsiggen control and waveform generation without having to directly deal with the underlying driver.
Quick-Control RF Signal Generator Functions (Instrument Control Toolbox)
rfsiggen function uses the following functions.
Quick-Control RF Signal Generator Properties (Instrument Control Toolbox)
rfsiggen function uses the following properties.
Download and Generate Signals with RF Signal Generator (Instrument Control Toolbox)
These examples show how to create the
rfsiggen object, download
waveforms, and generate signal and modulation output.
Troubleshooting IVI, VISA, and the Quick-Control Interfaces (Instrument Control Toolbox)
Try these tips if you have problems using the toolbox with the IVI, VISA, and Quick-Control interfaces. Includes information about supported platforms, adaptor requirements, configuration and connection, and other interface-specific tips.