Audio File Read
Read audio frames from an audio file
Simulink Support Package for Raspberry Pi Hardware / Audio and Video
The Audio File Read block copies an audio source file and outputs the audio data into your model. The audio data can be played on a loop multiple times, as specified by the Number of times to play file parameter. The audio data can consist of one or more channels, C. A mono audio source file has only one channel, and a stereo audio source file has two channels. The audio data is output from the block as N consecutive samples of audio data.
The Audio File Read block determines the sample time (Ts) from the samples per audio channel (N) and sampling frequency (Fs) of the selected audio file.
Ts = N / Fs
For example, if N is 4410 samples and Fs is 44,100 Hz, the block sample time is 4410/44,100 = 0.1 seconds.
N is the value that you specify in the Samples per audio channel (N) parameter. Fs of the selected audio file is automatically displayed on the block when you browse the file using the File name parameter.
Port_1 — Audio data
The block outputs the audio data as N-by-C matrix, where N is the samples per channel, and C is the number of channels supported by the audio.
For example, for a stereo audio source file with the Samples
per audio channel (N) parameter set to
the block organizes the audio data into a 3-by-2 matrix, which represents
a 2-channel signal containing three samples per channel.
Specify N with the Samples per audio channel (N) parameter. The number of channels, C, supported by the selected audio file is displayed in the block when you browse for the audio file using the File name parameter.
When the number of times the audio is played exceeds the value
specified in the Number of times to play file parameter,
the Port_1 port outputs
sample time. For example, if you set the Number of times
to play file parameter to
3, the Port_1 port
outputs zeroes after the audio file is played three times.
EOF — End of audio file indicator
The port outputs
1 when the last audio sample
is output from the block. Otherwise, the port outputs
To enable the port, select the Output end of audio indicator parameter.
File name — Name of audio file
If the location of the file does not appear on your MATLAB® path, click Browse to specify the full path. If the location of this file does appear on your MATLAB path, enter only the file name.
Number of times to play file — Number of times to play the audio file
inf (default) | any integer value greater than 0
inf to play the file until you stop
Output end of audio indicator — Determine whether the output is the last audio sample in the audio file
off (default) |
EOF port outputs
the last audio sample is output from the block. Otherwise, the port
Samples per audio channel(N) — Number of samples per audio channel
4410 (default) | any integer value greater than 0
This parameter specifies the number of rows of the output matrix that the block outputs. The output matrix has dimensions N-by-C, where N is the number of samples per channel, and C is the number of channels.
Introduced in R2017b