LPS25h Pressure Sensor

Measure barometric air pressure and ambient temperature

Add-On Required: This feature requires the Simulink Support Package for Raspberry Pi Hardware add-on.

• 

Libraries:
Simulink Support Package for Raspberry Pi Hardware / Sense HAT

Description

Measure barometric air pressure and ambient temperature using the Pressure sensor on board Raspberry Pi^® SenseHAT.

Ports

Output

Pressure — Barometric air pressure output port

scalar

The barometric air pressure measured in hectoPascal (hPa) from the Pressure sensor.

Data Types: double

Temp — Ambient temperature output port

scalar

The ambient temperature output measured in degree Celsius (C) from the Pressure sensor.

Data Types: double

Parameters

Board — Raspberry Pi hardware board

Pi 2 Model B (default) | Model B Rev1 | Model B Rev2 | Model B+ | Pi 3 Model B | Pi 3 Model B+ | Pi Zero W | Pi Zero 2 W | Pi 4 Model B | Compute Module 4

Select your Raspberry Pi hardware board. You can find this information on the target hardware, product packaging, or product documentation.

Sensor output data rate (ODR) — Rate at which the sensor measures data

12.5 Hz (default) | 1 Hz | 7 Hz

The rate at which the Pressure sensor measures barometric air pressure and the ambient temperature.

Sample time — Frequency at which data is measured data is read from Pressure sensor

0.1 (default) | scalar

Specify how often this block reads the measured data from the Pressure sensor.

Version History

Introduced in R2017a