This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

MATLAB Support Package for Raspberry Pi Hardware

Program sensor and image applications on Raspberry Pi

MATLAB® Support Package for Raspberry Pi™ Hardware enables you to communicate with a Raspberry Pi remotely from a computer running MATLAB or through a web browser with MATLAB Online™. You can acquire data from sensors and imaging devices connected to the Raspberry Pi and process them in MATLAB. You can also communicate with other hardware through the GPIO, serial, I2C, and SPI pins.

The support package functionality is extended if you have MATLAB Coder™. With MATLAB Coder, you can take the same MATLAB code used to interactively control the Raspberry Pi from your computer and deploy it directly to the Raspberry Pi to run as a standalone executable.

Installation and Setup

Install support for the hardware, update the firmware, and connect to the hardware

Connection to Raspberry Pi Hardware

Create a connection to Raspberry Pi hardware

Run on Target Hardware

Deploy a MATLAB function as a standalone executable on the hardware


Use the Raspberry Pi’s LED


Use the Raspberry Pi’s GPIO pins

Serial Port

Use the Raspberry Pi’s serial port

I2C Interface

Use the Raspberry Pi’s I2C interface

SPI Interface

Use the Raspberry Pi’s SPI interface

Camera Board

Use the Raspberry Pi’s add-on Camera Board

Sense HAT

Use the Raspberry Pi’s add-on Sense HAT Board

Web Camera

Use the Raspberry Pi web camera

Pulse Width Modulation

Use the Raspberry Pi to create pulse-width-modulation (PWM) signals on GPIO pins


Write to servo motors connected to the Raspberry Pi hardware


Use the Linux® command shell and manage files on Raspberry Pi hardware


Use the Raspberry Pi’s Display