Install Support for STMicroelectronics Discovery Boards

You can use the STMicroelectronics® Discovery™ boards with MATLAB® and Simulink® by installing Embedded Coder® Support Package for STMicroelectronics Discovery Boards. The STMicroelectronics Discovery boards, STM32F4, STM32F746G, and STM32F769I, incorporates ARM® Cortex-M4-based STM32F407VG, ARM Cortex-M7-based STM32F746NG, and ARM Cortex-M7-based STM32F769NIH6 processors respectively.

After you install the support package, you can use:

  • Supported hardware and its features

  • Block library to create models

  • Examples that show you how to use the Discovery boards

Install, Update, or Uninstall Support Package

Install Support Package

  1. On the MATLAB Home tab, in the Environment section, select Add-Ons > Get Hardware Support Packages.

  2. In the Add-On Explorer window, click the support package and then click Install.

Update Support Package

On the MATLAB Home tab, in the Environment section, select Help > Check for Updates.

Uninstall Support Package

  1. On the MATLAB Home tab, in the Environment section, click Add-Ons > Manage Add-Ons.

  2. In the Add-On Manager window, find and click the support package, and then click Uninstall.

Hardware Setup

Hardware boards and devices supported by MathWorks® require additional configuration and setup steps to connect to MATLAB and Simulink. Each support package provides a hardware setup process that guides you through registering, configuring, and connecting to your hardware board.

If the support package is already installed, you can start the hardware setup by opening the Add-On Manager.

In the Add-On Manager, start the hardware setup process by clicking the Setup button, .

After starting, the Hardware Setup window provides instructions for configuring the support package to work with your hardware.

Follow the instructions on each page of the Hardware Setup window. When the hardware setup process completes, you can open the examples to get familiar with the product and its features.

See Also