Setup and Configuration
Install the SoC Blockset™ Support Package for Texas Instruments™
C2000™ Processors. Develop applications for the TI’s C2000 processors with the features of the SoC Blockset. Configure models to deploy to hardware boards, such as the
Delfino F2837xD and
TI Delfino F28379D LaunchPad
|ADC Interface||Convert analog signal on ADC input pin to digital signal|
|ADC Read||Read ADC data values from ADC Interface block|
|PWM Interface||Simulate pulse width modulation (PWM) output from hardware|
|PWM Write||Send pulse width modulation (PWM) signal configuration to PWM Interface block|
|Interprocess Data Channel||Model interprocessor data channel between two processors|
|Interprocess Data Read||Receive messages from another processor using interprocess communication channel|
|Interprocess Data Write||Send messages to another processor using interprocessor data write|
|CLA Task Manager||Create and manage task executions in Control Law Accelerator (CLA) model|
|SW Trigger CPU<->CLA||Trigger software events between processor (CPU) and control law accelerator (CLA)|
- Install Support for TI’s C2000 MCUs
Instructions to install support for TI’s C2000 MCUs.
- Interprocess Data Communication via Dedicated Hardware Peripheral
Data communication methods between two or more processes within a single processor or across multiple connected processors.
- Using Control Law Accelerator (CLA)
Use the control law accelerator (CLA) co-processor in C2000 MCU models.
- Using ARM Cortex-M Coprocessor
Use the ARM® Cortex®-M coprocessor in C2000 MCU models.
- Run Multiprocessor Models in External Mode
Run a multiprocessor SoC model in external mode running on separate processors on the hardware board.
- Hardware Connections (Motor Control Blockset)
Connect motors, sensors, and power supply to hardware boards.
- Map Simulation Parameters to Peripheral Configuration Tool
Map the simulation parameters from interface blocks to the Peripheral Configuration tools.
- PIL Simulation
Processor-in-the-Loop (PIL) simulation techniques for Texas Instruments hardware board.
- Use Embedded Coder blocks with SoC Blockset
Use SoC Blockset pass-though block simulation with Embedded Coder® Support Package for Texas Instruments C2000 F28M3x Concerto™ Processors blocks.