Read analog values from the 3-wire port on VEX EDR V5 Robot Brain
Simulink Coder Support Package for VEX EDR V5 Robot Brain / Sensors
The Analog Input block reads analog values from the selected 3-wire port on VEX® EDR V5 Robot Brain. Use the block to measure the output of sensors (voltage), such as potentiometer, connected to the 3-wire port. The 12-bit sensor value has a range of 0 to 4095 that corresponds to an input voltage of 0V to 5V. You can use up to eight 3-wire ports on the VEX EDR V5 Robot Brain.
Port_1— Analog value read from the 3-wire port
Port— Select the 3-wire port to read the analog value
Select the 3-wire port on the VEX EDR V5 Robot Brain from which you want to read the analog value.
Do not assign the same port to more than one Analog Input block within the same model.
Sample time— Sample time for obtaining the value from the 3-wire port
0.2(default) | seconds
Specify how often the block should read the values from the 3-wire port.