Model Configuration Parameters for Xilinx Zynq ZedBoard
Hardware Implementation Pane Overview
In the Simulink® Editor, select Simulation > Model Configuration Parameters.
In the Configuration Parameter dialog box, click Hardware Implementation.
Set the Hardware board parameter to
ZedBoard
.The parameter values under Hardware board settings are automatically populated to their default values.
You can optionally adjust these parameters for your particular use case.
Click Apply.
For more information on selecting a hardware support package and general configuration settings, see Hardware Implementation Pane (Simulink).
Operating System Options
Parameter | Description | Default Value |
---|---|---|
Sets the static priority of the base rate task in the operating system. |
|
Board Parameters
Parameter | Description | Default Value |
---|---|---|
Device Address | Network address of hardware board or device. | 192.168.1.10 |
Username | Login username on hardware board or
device. |
|
Password | Login password on hardware board or device. |
|
Clocking
Parameter | Description | Default Value |
---|---|---|
The CPU clock frequency in MHz. |
|
Build Options
Parameter | Description | Default Value |
---|---|---|
Defines how Embedded Coder® responds when you build your model. |
|
External Mode
Parameter | Description | Default Value |
---|---|---|
Transport layer used to exchange data between the development computer and hardware. |
| |
Execute the external mode engine in the generated code in a background task. |
| |
IP port of the hardware board. |
| |
Enable view of the external mode execution progress and updates in the Diagnostic Viewer. |
|
See Also
Model Configuration Parameters for Xilinx Zynq ZC702/ZC706 Evaluation Kits