Universal Datagram Protocol (UDP) is a packet-based protocol that uses an Ethernet board as physical layer. Each UDP packet contains bytes provided by an application layer. You can transfer data using this protocol from a real-time application that is executing on the target computer. For more information about the UDP standard, see UDP Transport Protocol.
The Simulink® Real-Time™ implementation can support either a dedicated Ethernet network or a shared Ethernet network.
To create a dedicated Ethernet network, use a separate Ethernet board that is compatible with PCI standard bus architectures, such as PCI, PCI Express®, and PXI®. Configure the UDP Configure block with the PCI bus and slot number of the dedicated Ethernet board. You can run this implementation of the protocol from a real-time application that is running on the target computer. You can use it to transfer data to and from a UDP-compatible device.
To create a shared Ethernet network, use the same Ethernet hardware port as the target computer uses to communicate with the development computer. Configure the UDP Send and UDP Receive blocks to use the host-target connection setting. In this mode, you do not need a UDP Configure block. You can run this implementation of the protocol from a real-time application that is running on the target computer. You can also run it from a Simulink model that is running on the development computer. To transfer data to and from a UDP-compatible device that is connected to this network, use a switch.
|Convert character vector or string scalar MAC address to vector-based address|
Learn about communication between the target computer and other devices with UDP packets.
Learn about UDP communication via a connection that is shared between the development and target computers.
Use the UDP library blocks for communication with a shared and with a dedicated connection.
Adapt variable-size signals for processing by UDP blocks.
Investigate issues with UDP block configuration that generate communication problems.