This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Standalone Target Computer Setup

Real-time application configuration to be independent of MATLAB®

You can create a real-time application that runs standalone on a target computer, without a development computer running MATLAB. Configure the standalone application so that it starts running when the target computer starts. The application continues for as long as the target computer is operating.

To start and stop the standalone application, tune parameters, and view signal values, use Simulink® Real-Time™ Explorer, either from MATLAB or exported as a standalone executable.

Tools

Simulink Real-Time ExplorerInteract with target computer and real-time application running on target computer
Simulink Real-Time Target Computer ManagerInteract with target computer

Functions

slrtexplrConfigure target computer and real-time application for execution
SimulinkRealTime.utils.TargetComputerManagerConfigure connection to target computer and real-time application for execution

Topics

Standalone Mode

Running your real-time application on the target computer without a development computer.

Standalone Boot Method

Run real-time applications without a development computer.