This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Test 7: Execute Real-Time Application

This test executes a real-time application (slrttestmdl) on the target computer. If you change the slrttestmdl model start time to something other than 0, such as 0.001, this test fails. This change causes the test, and the MATLAB® interface, to halt. To address this failure:

  1. Set the slrttestmdl model start time back to 0.

  2. Rerun the test.

If this procedure does not solve your issue, continue with the tests in Troubleshoot with Confidence Test. If you still cannot solve your issue, see Find Simulink Real-Time Support.