This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Test 8: Upload Logged Data and Compare Results

This test executes a real-time application (slrttestmdl) on the target computer. If you change the slrttestmdl model (for example, if you remove the Outport block), this test can fail.

Note

Do not modify the files installed with the Simulink® Real-Time™ software. If you want to modify one of these files for your own purposes, copy the file and modify the copy.

  1. Restore the slrttestmdl example model to its original state by one of the following methods:

    • Recreate the original model by editing it in the following location:

      matlabroot\toolbox\rtw\targets\xpc\xpcdemos 
      
    • Reinstall the software.

  2. If you are running a new Simulink Real-Time release, check that you have updated the target boot kernel for this release. See Install Simulink Real-Time Software Updates.

If this procedure does not solve your issue, continue with the tests in Troubleshoot with Confidence Test. If all tests are successful but these do not solve your issue, try the solutions available in Troubleshooting in Simulink Real-Time. If you still cannot solve your issue, see Find Simulink Real-Time Support.