Arun Mathamkode

Last seen: Today | Active since 2017

Followers: 0 Following: 0

Statistics

Feeds

Answered
UAV Toolbox Support Package Alternative?
The R2024a release of UAV Toolbox Support Package for PX4 Autopilots now supports PX4 Firmware v1.14

15 days ago | 0

| accepted

Answered
The HITL example of UAV toolbox, there was a problem with QGC mission
Are you seeing any errors in the QGC or in NSH shell that why its disarming? without that it is bit difficult to understand what...

16 days ago | 0

Answered
Error when run "Run quadcopter plant in normal simulation" in "Px4DemoHostTargetWithSimulinkPlant" example.
As the error clearly says the base sample time of the model you use is 0 and that cannot be supported in Nuttx. You need to make...

16 days ago | 0

Answered
Use Multiple GPS in PX4 with PX4 supported package?
It is possible to use two GPS over serial connection. Most of the Pixhawk boards will have two GPS ports (GPS1 and GPS2) and it ...

16 days ago | 0

| accepted

Answered
How to locate the PX4 files which in wsl2 when I use the UAV ToolBox for PX4?
I believe the issue you might be facing is because of the distribution root folder name. The expected path is '\\wsl.localhost\U...

24 days ago | 0

| accepted

Answered
Questions about "UAV Toolbox Support Package for PX4 Autopilots" toolbox.
This means that the sensor modules are not publishing the corresponding uORB message. For example, Accelerometer block reads 's...

4 months ago | 0

Answered
Building Cube Orange Model by Simulink
Other than the Cygwin toolchain and PX4 Firmware sources there are no additional dependencies required to deploy the code from S...

4 months ago | 0

Answered
PX4 HIL with Pixhawk 6x with Monitor and Tune ERROR:Could not connect to target application: XCP internal error: timeout expired, in response to XCP CONNECT command
From the details provided, the serial port mapping you used, PX4 hardware connections, QGC parameters and the configuration sett...

6 months ago | 0

| accepted

Answered
PX4 SITL with Simulink based Plant Model
Depends on when the plant and controller start running there can be an offset between controller and plant. And as per the curre...

8 months ago | 0

| accepted

Answered
Monitor and Tune PX4 Host Target Flight Controller with Simulink-Based Plant Model: Mismatched TCP Node
As per the documentation you need to run the Plant model first and then run the Controller model in another instance of MATLAB (...

9 months ago | 0

Answered
User-defined PX4 uORB messages
Custom uORB messages are not supported with Connected I/O currently. You can consider using the Monitor and Tune Simulation inst...

9 months ago | 1

| accepted

Answered
UAV Toolbox support package for PX4 Autopilots- Host target simulation
The controller and plant are in lock step simulation by default. What this means is that PX4 controller and the plant wait on e...

9 months ago | 0

| accepted

Answered
rror copying generated code into Pixhawk firmware directory. Delete the files in the folder C:\PX4\home\Firmware\src\modules\px4_simulink_app manually and try building again.
As the error messages says, Delete the files in the folder C:\PX4\home\Firmware\src\modules\px4_simulink_app manually and try b...

10 months ago | 0

Answered
px4 RAM and flash overflow occur
Yeah for the flash issue, you can consider removing modules. For example, if you are working with a multi-copter, you can consid...

10 months ago | 1

| accepted

Answered
Pushing a custom simulink UAV model to px4.
As per your initial question, I understand that you want to deploy the custom controller on a PX4 autopilot for a real flight te...

12 months ago | 1

Answered
How to performe simulation SITL with Gazebo using PX4 Autopilots Support from UAV Toolbox? ERROR displayed
Can you verify that the SITL and jMAVSim are launched without any errors on your machine? We have seen Java dependency issues wi...

12 months ago | 0

| accepted

Answered
PX4 Supported package - Why Simulink SITL use uORB ground truth?
You should be able to use vehicle_local_position instead of vehicle_local_position_groundtruth as well. I would recommend you tr...

12 months ago | 0

Answered
Position Tracking for X-Configuration Quadcopter error in accel and gyro sensors
The error you are getting looks like an issue of connectivity between the plant (jMAVSim) and the PX4 Host Target. The plant sho...

1 year ago | 0

Answered
PX4 building on MATLAB on Windows
Pixhawk 3DR flight controller has been discontinued and is no longer commercially available. You can use the mRo Pixhawk instead...

1 year ago | 0

Answered
Simulink Pixhawk 1 Build Error: "MW_target_hardware_resources.h": No such file or directory
I would encourage you to use MATLAB R2022b version instead of the below workaround. From MATLAB R2022b PX4 v1.12.3 is supported...

1 year ago | 1

| accepted

Answered
Pixhawk 6X / 5X / 6C support by Simulink
Flash overflow issues are seen with Pixhawk 6x during deployment, to resolve this you can consider manually removing unused modu...

1 year ago | 2

Answered
Is it possible to use the pixhawk 6x with the "UAV toolbox support package for PX4 autopilot"?
You can choose the 'PX4 Pixhawk Series' as the hardware board. Please ensure that you have completed the Hardware Setup screens ...

1 year ago | 0

Answered
PX4 Autopilot in Hardware-in-the-Loop (HITL) Simulation with UAV Dynamics in Simulink
Micro SD card is required for mission upload. Please insert a supported micro SD card to the Pixhawk 4 board. I can see that the...

1 year ago | 0

Answered
Simulink-PX4: Difference between R2022a R2022b (same simulink model does not work in R2022b)
Connected I/O Simulation is not ideally designed for running controller kind of models where the model needs to run at a much hi...

1 year ago | 1

Answered
UAV Toolbox Support Package for PX4 Autopilots - px4_simulink_app module
The modules you are adding to the rc.txt will be started after the board bootup, irrespective of whether you have connected QGro...

1 year ago | 0

Answered
How to upload MATLAB PX4 Autopilot HITL example in real quadrotor UAV?
Deploying for actual flight and HITL is not much different with respect to the Simulink Workflow. For actual flight you might ne...

1 year ago | 0

Answered
UAV Toolbox Support Package for PX4 Autopilots - Pixhawk 4 Flight Experiment
Only controller is replaced from Simulink and MAVLink module is untouched. I am not convinced from this description that the No ...

1 year ago | 0

| accepted

Answered
Understand EKF with SITL/HITL simulation with PX4
The SITL and HITL example you have mentioned is based on replacing the PX4 controller with the controller designed in Simulink. ...

1 year ago | 0

| accepted

Answered
Why do I get XCP internal error: timeout expired?
TELEM1 serial port are fundamentally designed for MAVLink communication and by default MAVLink is enabled in this port. You can ...

1 year ago | 0

Answered
UAV Toolbox Support Package for PX4 Autopilots - Pixhawk 4 Flight preparation
As per my understanding there are no specific steps other than what you did to deploy code for an actual flight. I can provide ...

1 year ago | 1

| accepted