Answered
Is it possible to install MATLAB libraries directly to a Raspberry pi?
Hi, You are encountering this error because you are using MATLAB Support package for Raspberry Pi with the Raspberry pi of "boo...

1 year ago | 1

| accepted

Answered
please anyone help me I need convert this code to matlab 🥺
Hi, Thanks for reaching out to us. You can use MATLAB Support Package for Arduino Hardware to try this workflow. Here are th...

1 year ago | 0

Answered
How to solve unmet dependancies, Raspberry Pi 4B
Hi ! Seems like there is issue with the operating system release of your raspberrypi. Please check Operating System release ...

1 year ago | 1

| accepted

Answered
Having trouble with arduinosetup
Hi, Thanks for reaching out to us. Please contact MathWorks Technical Support to resolve this errors. https://www.mathworks...

1 year ago | 0

Answered
Raspberry can communication STM32F1 by CAN protocol
Hi, You can use any MCP2515-based CAN shield to connect to Raspberry Pi and interact with a CAN network. Refer to this link...

1 year ago | 0

Answered
Cannot connect to Raspberry Pi, Error executing command "make ONLY_MATLAB_IO=1 -C /opt/MATLAB/mw_server_v23.1.0 -f Makefile".
Hi, Seems like some of the libraries has not been installed on your Raspberry Pi hardware. Please perform steps given in the...

1 year ago | 0

Answered
How to connect simulink with raspberry?
Hi, We kindly request that you update the locale settings by following the instructions provided in the following link, https:...

1 year ago | 0

Answered
Error message reading analog pins on Arduino boards in MATLAB R2023B - "Specified key type does not match the type expected for this container."
Hello, Thank you for contacting us. We apologize for the inconvenience you are experiencing. To resolve this issue, we kindly ...

1 year ago | 0

Answered
Arduino readVoltage not working
Hello, Thank you for contacting us. We apologize for the inconvenience you are experiencing. To resolve this issue, we kindly ...

1 year ago | 0

Answered
Matlab and Ubuntu 20.04 in RaspberryPi4
Hi , MATLAB Support Package for Raspberry Pi hardware currently supports the 32-bit Raspberry Pi Linux® operating system. For m...

1 year ago | 0

Answered
how to run deep learning project with raspberry pi 4 modelB
Hi, It appears that OpenCV and ARM Compute libraries are not installed on your hardware. To resolve this, you can follow these ...

1 year ago | 0

Answered
when i want connect to raspberry occure error: Error executing command "make ONLY_MATLAB_IO=0 -C /opt/MATLAB/mw_server_v21.1.0 -f Makefile"
Hi, Setup the Raspberry Pi hardware using hardware setup screen to resolve this issue, you can follow these steps From Home ...

1 year ago | 0

| accepted

Answered
How to solve the error in upload arduino server? the detail says: numeric value exceeds the number of characters in element 1
Hi Can you please reach out to us to resolve this issue? You can contact our technical support for further assistance, https:/...

1 year ago | 0

Answered
Error in opening MATLAB device file for LED trigger source.
Hi All, Follow these steps to resolve the issue, Open Raspberry Pi terminal and execute $ cd /opt/MATLAB/ $ sudo pki...

1 year ago | 5

Answered
Cannot connect to the IP Camera Stream URL
This could be due to a IP camera connection issue mentioned here. It is now fixed in the latest MATLAB update. Update your MATLA...

2 years ago | 0

Answered
Why I can not connect to IP camera with ipcam
As mentioned in the above answer, this connection issue was a known bug. It is now fixed in the latest MATLAB update. Update you...

2 years ago | 1

Answered
Unable to acquire the live (streaming) video h264 over rtsp of my ip camera using the “IP camera acquisition” package on Matlab2020b
The MATLAB Support Package for IP Cameras now supports "digest authentication" from R2022b release.

2 years ago | 1

Answered
Why scanning for nearby Bluetooth Low Energy devices using blelist in macOS 12 (Monterey) returns an empty table?
Update the macOS to macOS Monterey 12.3 or a later version, and then start MATLAB. You can then run blelist with or without argu...

2 years ago | 0

| accepted

Answered
Audio volume level increases automatically when using record function in MATLAB?
This is due to a Windows level system setting that adjusts the volume of different sounds when you are using the microphone. To...

2 years ago | 0

Question

Audio volume level increases automatically when using record function in MATLAB?
I have the Windows system volume set to 50%, but I see the volume automatically increase to around 100% when I use the record fu...

2 years ago | 1 answer | 0

1

answer

Question

Why scanning for nearby Bluetooth Low Energy devices using blelist in macOS 12 (Monterey) returns an empty table?
MATLAB installed on macOS 12 (Monterey) does not detect nearby Bluetooth Low Energy devices when you run blelist without argumen...

2 years ago | 1 answer | 0

1

answer

Answered
How to connect and control multiple Ryze Tello drones
With the MATLAB Support package for Ryze Tello Drones, you can connect to and control multiple Tello EDU drones from the same MA...

2 years ago | 1

| accepted

Question

How to connect and control multiple Ryze Tello drones
I want to connect to two Ryze Tello EDU drones and navigate them from the same MATLAB session. How can it be done?

2 years ago | 1 answer | 0

1

answer

Answered
Why is read flight data returning empty even after successful connection to the Ryze Tello drone in MATLAB.
This issue could be due to Windows Firewall blocking the port to which the Ryze® Tello drone streams flight data to MATLAB.To fi...

3 years ago | 1

Question

Why is read flight data returning empty even after successful connection to the Ryze Tello drone in MATLAB.
I am able to create a ryze object succesfully. But the flight data for the ryze object is empty. Due to which all read APIs: rea...

3 years ago | 1 answer | 0

1

answer

Answered
cannot programme in MATLAB Support Package for Arduino Hardware
Hi Rushabh, Kindly reach out to MathWorks Technical Support to get help in resolving the issue https://www.mathworks.com/suppo...

3 years ago | 0

| accepted

Answered
Can I interface JY901 sensor to Raspberry Pi?
Yes, we can use JY901 sensor to interface with Raspberry Pi using MATLAB. This sensor supports Modified transactions for NO STAR...

3 years ago | 0

| accepted

Question

Can I interface JY901 sensor to Raspberry Pi?
I have an I2C based altitude angle sensor JY901 sensor which uses I2C protocol Modified transactions. Can I use this sensor to i...

3 years ago | 1 answer | 0

1

answer

Answered
Addressing 16-bit I2C register with Raspberry Pi
Hi Henrik, You can use write() and read() APIs for the same. Here is the code snippet that can help you, >> % Read the data ...

3 years ago | 0

Answered
MATLAB and Raspberry Pi connection problem
Hi, Seems like the Raspberry Pi needs to be setup first, you can do that by performing following steps, * Go to "Home" tab ...

3 years ago | 0

| accepted