Chris Turnes
MathWorks
54 total contributions since 2014I'm an electrical engineer by education.
Professional Interests: signal processing, image processing, linear algebra.
Chris Turnes's Badges
20 of your answers have been accepted
Awarded to Chris Turnes on 06 Jan 2019
Contribute at least one answer each month for 3 consecutive months
Awarded to Chris Turnes on 20 Jul 2017
Answer 1 question that was unanswered for more than 30 days
Awarded to Chris Turnes on 20 Jul 2017
Provide your first answer ever to someone else's question
Awarded to Chris Turnes on 20 Jul 2017
Answered
when smoothing data with gaussian how to define sd and mean
The 'gaussian' method for smoothdata uses a fixed (but window-dependent) standard deviation, and mean of zero. If you want to s...
when smoothing data with gaussian how to define sd and mean
The 'gaussian' method for smoothdata uses a fixed (but window-dependent) standard deviation, and mean of zero. If you want to s...
5 months ago | 1
| accepted
Answered
Moving Average of Matrix over 10 min interval
The error message could be clearer about the problem you're having, but you're getting the message because you've misspelled "Sa...
Moving Average of Matrix over 10 min interval
The error message could be clearer about the problem you're having, but you're getting the message because you've misspelled "Sa...
5 months ago | 0
Answered
find local maxima around a point
If you can provide a MAT file with the data, it would be helpful in answering the question more concretely. You should be able ...
find local maxima around a point
If you can provide a MAT file with the data, it would be helpful in answering the question more concretely. You should be able ...
7 months ago | 0
Answered
Cut a signal into heart cycle pieces
I don't have your data, but using something that looks roughly similar (attached), here's an approach. Furthering John's commen...
Cut a signal into heart cycle pieces
I don't have your data, but using something that looks roughly similar (attached), here's an approach. Furthering John's commen...
11 months ago | 1
| accepted
Answered
How do I identify subsets of data and divide the data into the subsets
Mark's answer is a great way of doing this. In addition, you might consider looking at the ischange function: % Look for at mo...
How do I identify subsets of data and divide the data into the subsets
Mark's answer is a great way of doing this. In addition, you might consider looking at the ischange function: % Look for at mo...
12 months ago | 0
Answered
How does "smoothdata" function using "gaussian" method define the standard deviation for different window size?
The standard deviation of the Gaussian for |smoothdata| is fixed to be 1/5th of the total window width, so there is a direct lin...
How does "smoothdata" function using "gaussian" method define the standard deviation for different window size?
The standard deviation of the Gaussian for |smoothdata| is fixed to be 1/5th of the total window width, so there is a direct lin...
1 year ago | 1
| accepted
Answered
How to make a softer plot using a moving average every ''x'' skips?
It sounds like what you might want to do is put your data into a <https://www.mathworks.com/help/matlab/ref/timetable.html |time...
How to make a softer plot using a moving average every ''x'' skips?
It sounds like what you might want to do is put your data into a <https://www.mathworks.com/help/matlab/ref/timetable.html |time...
1 year ago | 0
Answered
Using smoothdata on tallaray that contains time
|smoothdata| does not support tall timetables, and similarly does not support the |'SamplePoints'| Name-Value pair for tall inpu...
Using smoothdata on tallaray that contains time
|smoothdata| does not support tall timetables, and similarly does not support the |'SamplePoints'| Name-Value pair for tall inpu...
1 year ago | 0
Answered
how to find and mark the value of local minimums in a graph of multiple data ?
If you have access to R2017b, you might also consider checking out the <https://www.mathworks.com/help/matlab/ref/islocalmin.htm...
how to find and mark the value of local minimums in a graph of multiple data ?
If you have access to R2017b, you might also consider checking out the <https://www.mathworks.com/help/matlab/ref/islocalmin.htm...
2 years ago | 0
Answered
Find sudden jumps in signal
If you have access to R2017b, try taking a look at the <https://www.mathworks.com/help/matlab/ref/ischange.html |ischange| funct...
Find sudden jumps in signal
If you have access to R2017b, try taking a look at the <https://www.mathworks.com/help/matlab/ref/ischange.html |ischange| funct...
2 years ago | 0
Answered
Data segmentation for Accelerometer time series data
For the segmentation, if you have R2017b, <https://www.mathworks.com/help/matlab/ref/ischange.html the new |ischange| function> ...
Data segmentation for Accelerometer time series data
For the segmentation, if you have R2017b, <https://www.mathworks.com/help/matlab/ref/ischange.html the new |ischange| function> ...
2 years ago | 0
Answered
How to write a circulant matrix , where the elements are matrices? Thanks!
Supposing the matrices you want to use in a circulant pattern are stored as a |M| x |N| x |K| array (where |M| x |N| is the size...
How to write a circulant matrix , where the elements are matrices? Thanks!
Supposing the matrices you want to use in a circulant pattern are stored as a |M| x |N| x |K| array (where |M| x |N| is the size...
2 years ago | 0
Answered
Sorting the complex array elements with imaginary part along with it.
If you have a recent version of MATLAB, try checking out the <https://www.mathworks.com/help/matlab/ref/sort.html#namevaluepaira...
Sorting the complex array elements with imaginary part along with it.
If you have a recent version of MATLAB, try checking out the <https://www.mathworks.com/help/matlab/ref/sort.html#namevaluepaira...
2 years ago | 2
Answered
Efficient moving average of scattered data
If you can upgrade to R2017a, this functionality can now be achieved through the 'SamplePoints' name-value pair in the moving st...
Efficient moving average of scattered data
If you can upgrade to R2017a, this functionality can now be achieved through the 'SamplePoints' name-value pair in the moving st...
2 years ago | 1
Answered
Delete rows with NaN records
Not that this question needed another answer, but, you can also check out the <http://www.mathworks.com/help/matlab/ref/rmmissin...
Delete rows with NaN records
Not that this question needed another answer, but, you can also check out the <http://www.mathworks.com/help/matlab/ref/rmmissin...
3 years ago | 2
Answered
How to replace a NaN element with an preceeding element in a matrix using logical indexing?
As far as replacing with the previous non-NaN element, you could check out the <http://www.mathworks.com/help/matlab/ref/fillmis...
How to replace a NaN element with an preceeding element in a matrix using logical indexing?
As far as replacing with the previous non-NaN element, you could check out the <http://www.mathworks.com/help/matlab/ref/fillmis...
3 years ago | 0
Answered
How to use "movsum()" with panel data in a table using loop mechanisms?
I think you just want to use |sum| here, and not |movsum|, since you're summing over different columns each time. Regardless, t...
How to use "movsum()" with panel data in a table using loop mechanisms?
I think you just want to use |sum| here, and not |movsum|, since you're summing over different columns each time. Regardless, t...
3 years ago | 1
| accepted
Answered
How to calculate Sums in a Panel Data framework using "For Loops"
To get the moving sum of the previous 12 elements, and marking all windows NaN where you don't have 11 previous points, you can ...
How to calculate Sums in a Panel Data framework using "For Loops"
To get the moving sum of the previous 12 elements, and marking all windows NaN where you don't have 11 previous points, you can ...
3 years ago | 0
| accepted
Answered
Convolution of many vectors
You can use a fun trick here. Each of these polynomials is a quadratic, so you can find their roots easily enough: F = F(:...
Convolution of many vectors
You can use a fun trick here. Each of these polynomials is a quadratic, so you can find their roots easily enough: F = F(:...
3 years ago | 0
Answered
How to exclude the center/current number when performing movmax?
There's no direct way to exclude the current point in a given window with the moving statistics functions. However, since you w...
How to exclude the center/current number when performing movmax?
There's no direct way to exclude the current point in a given window with the moving statistics functions. However, since you w...
3 years ago | 1
| accepted
Answered
Help on calculating cumulative moving average
If you're trying to do a cumulative moving mean, where each time you move to the next element it is the mean of that element and...
Help on calculating cumulative moving average
If you're trying to do a cumulative moving mean, where each time you move to the next element it is the mean of that element and...
3 years ago | 2
Answered
mean value of a group of data with NaNs
You can also just use the 'omitnan' option in "mean": A = [1 0 0 1 NaN 1 NaN 0]; M = mean(A,'omitnan') M = 0.5...
mean value of a group of data with NaNs
You can also just use the 'omitnan' option in "mean": A = [1 0 0 1 NaN 1 NaN 0]; M = mean(A,'omitnan') M = 0.5...
3 years ago | 2
Answered
How to convert the mean value of an integer matrix to a double
Are regionA and regionB allocated as integers? It seems likely he final assignment that is casting them back to integers. Sinc...
How to convert the mean value of an integer matrix to a double
Are regionA and regionB allocated as integers? It seems likely he final assignment that is casting them back to integers. Sinc...
3 years ago | 0
| accepted
Answered
How to limit rounding in matrix division
Your last sentence has the answer: your data type is uint8. Dividing a uint8 by a uint8 is going to give you another integer, s...
How to limit rounding in matrix division
Your last sentence has the answer: your data type is uint8. Dividing a uint8 by a uint8 is going to give you another integer, s...
3 years ago | 0
Answered
How to interpolate for given inputs in a n*m matrix
If I understand your question correctly, it sounds like <http://www.mathworks.com/help/matlab/ref/griddedinterpolant-class.html ...
How to interpolate for given inputs in a n*m matrix
If I understand your question correctly, it sounds like <http://www.mathworks.com/help/matlab/ref/griddedinterpolant-class.html ...
3 years ago | 0
| accepted
Answered
Why is MATLAB crashing on medium-to-large matrices?
Does it create a crash log? If so, what's in the log? You can find it using the directions located here: <http://www.mathwo...
Why is MATLAB crashing on medium-to-large matrices?
Does it create a crash log? If so, what's in the log? You can find it using the directions located here: <http://www.mathwo...
4 years ago | 0
Answered
How to realzie iczt use Matlab?
There's not necessarily going to be a straightforward inverse for the Chirp-Z transform unless its parameters define evenly spac...
How to realzie iczt use Matlab?
There's not necessarily going to be a straightforward inverse for the Chirp-Z transform unless its parameters define evenly spac...
4 years ago | 1
Answered
How do I reduce this nxmx3 matrix to a (n*m)x3 matrix?
It sounds like you want a combination of <http://www.mathworks.com/help/matlab/ref/permute.html permute> and <http://www.mathwor...
How do I reduce this nxmx3 matrix to a (n*m)x3 matrix?
It sounds like you want a combination of <http://www.mathworks.com/help/matlab/ref/permute.html permute> and <http://www.mathwor...
4 years ago | 0
| accepted
Answered
Combine datasets of unequal lengths by matching dates
There's a little bit of ambiguity here, but this shouldn't be too hard. What happens when there is no corresponding date from V...
Combine datasets of unequal lengths by matching dates
There's a little bit of ambiguity here, but this shouldn't be too hard. What happens when there is no corresponding date from V...
4 years ago | 0
Answered
Does anyone know how to allocate a vector with datetime elements?
<http://www.mathworks.com/matlabcentral/newsreader/view_thread/338369 This question has appeared before>, but there are two opti...
Does anyone know how to allocate a vector with datetime elements?
<http://www.mathworks.com/matlabcentral/newsreader/view_thread/338369 This question has appeared before>, but there are two opti...
4 years ago | 5
| accepted
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
Select web siteYou can also select a web site from the following list:
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)