Hardware-Software Prototyping of an LTE MIB Recovery Design - MATLAB & Simulink
Current Time 0:00
Duration 4:20
Loaded: 3.84%
Stream Type LIVE
Remaining Time 4:20
 
1x
  • Chapters
  • descriptions off, selected
  • captions off, selected
  • en (Main), selected

    Hardware-Software Prototyping of an LTE MIB Recovery Design

    Wireless applications have to process signals under real-world conditions, such as weak signal strength and interference. Once a design has been verified as much as possible with simulation using generated or captured waveforms, prototyping on an FPGA development kit allows for real-time processing of live over-the-air signals. This example shows a hardware-software implementation of an LTE master information block (MIB) recovery application running on a software-defined radio kit using the Communications Toolbox™ Support Package for Xilinx® Zynq®-Based Radio. Learn how to:

    • Find, download, and install the support package
    • Open the model that ships with the support package
    • Design hardware-software interface control functionality
    • Generate HDL and software drivers with AXI4 interfaces
    • Deploy software to a connected Xilinx Zynq device
    • Run a prototype in external mode

    Published: 28 Nov 2017

    Feedback

    Up Next:

    Understand the placement of physical channels and signals in the LTE resource grid, and learn how they help a mobile unit connect to a base station and receive data. Generate an LTE resource grid with a few lines of code using LTE Toolbox.

    LTE Tutorial: Understanding the LTE Resource Grid

    Related Videos:

    Modeling and simulation of 5G or LTE or WLAN waveforms in MATLAB. Transmission/reception of LTE/WLAN waveforms over the air with analysis and measurements

    5G/LTE/WLAN: Waveform Generation, Simulation, Measurement...

    Extract system information type 1 (SIB1) from a live LTE signal using LTE Toolbox. Perform frame synchronization, cell search, PBCH decoding, blind PDCCH search, and SIB1 demodulation by taking advantage of advanced algorithms.

    Acquiring System Information from an LTE Signal

    Design, verify, and simulate LTE and LTE-Advanced communications systems with LTE Toolbox. Generate LTE signals; measure throughput, EVM, and ACLR; and capture and demodulate live LTE signals.

    LTE Toolbox Overview

    This webinar describes the SDR connectivity and rapid prototyping capabilities available from the Communications Toolbox. These capabilities enable easy data capture and analysis, and enable hardware radio design starting from a behavioral model.

    Wireless Over-the-Air Testing using SDRs

    View more related videos