Documentation

This is machine translation

Translated by Microsoft
Mouse over text to see original. Click the button below to return to the English verison of the page.

Change Axis Limits of Graph

This example shows how to change the axis limits of a graph. By default, MATLAB® chooses axis limits to encompass the data plotted.

Change Axis Limits

Create x as 200 linearly spaced values between -10 and 10. Create y as the sine of x with an exponentially decreasing amplitude. Create a line plot of the data.

x = linspace(-10,10,200);
y = sin(4*x)./exp(x);
plot(x,y)

Change the axis limits by passing to the axis function a four-element vector of the form [xmin,xmax,ymin,ymax], where xmin and xmax set the scaling for the x-axis, and ymin and ymax set the scaling for the y-axis. Change the x-axis scaling to range from 0 to 10. Change the y-axis scaling to range from -1 to 1.

axis([0,10,-1,1])

You also can change the axis limits using the xlim, ylim, and zlim functions. The commands xlim([xmin,xmax]) and ylim([ymin,ymax]) produce the same result as axis([xmin,xmax,ymin,ymax]).

Use Semiautomatic Axis Limits

Use an automatically calculated minimum x-axis limit by setting its value to -inf. MATLAB® calculates the limit based on the data. Set the maximum x-axis limit to 10, the minimum y-axis limit to -1, and the maximum y-axis limit to 1.

axis([-inf,10,-1,1])

MATLAB calculates the minimum limit for the x-axis based on the data. To use an automatically calculated maximum limit, set the value to inf.

See Also

| | | |

Related Examples

Was this topic helpful?