g.tec Support from Data Acquisition Toolbox
Create your own waveforms, measurement and analysis routines, and applications for g.tec hardware using MATLAB and Data Acquisition Toolbox.
Note: Beginning with R2016a, MATLAB is no longer available on 32-bit systems. Because the existing adapters for g.tec data acquisition hardware are 32-bit only, this hardware is currently only supported by Data Acquisition Toolbox R2015b and earlier. For a list of supported data acquisition hardware, see Hardware Support from Data Acquisition Toolbox.
Guger Technologies (g.tec) manufactures high accuracy biosignal amplifier and acquisition/processing systems and multimodal biosignal data recorders. Use MATLAB® as your single software environment to create your own waveforms, measurement and analysis routines, and automated instrument applications for g.tec hardware.
MATLAB supports g.tec hardware through Data Acquisition Toolbox™. Specifically, it supports this hardware by downloading and using an adaptor API for the g.MOBIlab+ or g.USBamp hardware available directly from g.tec. This g.tec hardware can also be used from Simulink® using the Data Acquisition Toolbox to incorporate live data into your Simulink models.
With g.tec hardware support, you can perform the following tasks in MATLAB or Simulink:
- Acquire data from all analog input channels
- Control and generate data from analog output channels
- Control the digital I/O channels
- Configure the sampling rate of the DAQ hardware
- Trigger the start of your data acquisition
- Find and display the device settings
Platform and Release Support
Using MATLAB or Simulink with g.tec hardware requires installing the 32-bit version of MATLAB whether you are using a 32-bit or 64-bit Windows® machine. The 32-bit version of MATLAB can be installed on a 64-bit Windows operating system.