Energy Storage

Batteries, starters, and alternators

Use the energy storage blocks to assemble automotive electrical systems for battery sizing and performance studies.

Functions

`Battery.MetaData`	Define battery metadata
`Battery.Parameters`	Define battery equivalent circuit parameters
`Battery.PulseSequence`	Define a single pulse sequence
`Battery.Pulse`	Define a single pulse event

Blocks

expand all

Batteries

Datasheet Battery	Lithium-ion, lithium-polymer, or lead-acid battery
Estimation Equivalent Circuit Battery	Resistor-capacitor (RC) circuit battery that determines combined voltage using lookup tables
Equivalent Circuit Battery	Resistor-capacitor (RC) circuit battery

Electrical System Components

Bidirectional DC-DC	DC-to-DC converter that supports bidirectional boost and buck
Reduced Lundell Alternator	Reduced Lundell (claw-pole) alternator with an external voltage regulator
Starter	Starter as a DC motor

Power Accounting

Power Accounting Bus Creator

Create power information bus

Topics

Calibrate Mapped DC-to-DC Converters Using Data
Use the Virtual Vehicle Composer to calibrate mapped DC-to-DC converters from imported data.
Generate Parameter Data for Datasheet Battery Block
Import lithium-ion battery sheet data and generate parameters for the Datasheet Battery block.
Generate Parameter Data for Equivalent Circuit Battery Block

Generate parameters for the Equivalent Circuit Battery block.
- STEP 1: Estimate Equivalent Circuit Lithium-Ion Battery Data
- STEP 2: Set Equivalent Circuit Battery Block Parameters

Related Information

Featured Examples

Build Hybrid Electric Vehicle Multimode Model

Build a vehicle using the hybrid electric vehicle (HEV) multimode reference application.

Build Hybrid Electric Vehicle Input Power-Split Model

Build a vehicle using the hybrid electric vehicle (HEV) input power-split reference application.

Build Hybrid Electric Vehicle P0 Model

Build a vehicle using the hybrid electric vehicle (HEV) P0 reference application.

Build Hybrid Electric Vehicle P1 Model

Build a vehicle using the hybrid electric vehicle (HEV) P1 reference application.

Build Hybrid Electric Vehicle P2 Model

Build a vehicle using the hybrid electric vehicle (HEV) P2 reference application.

Build Hybrid Electric Vehicle P3 Model

Build a vehicle using the hybrid electric vehicle (HEV) P3 reference application.

Build Hybrid Electric Vehicle P4 Model

Build a vehicle using the hybrid electric vehicle (HEV) P4 reference application.

Build Full Electric Vehicle Model

Build a vehicle with a motor-generator, battery, direct-drive transmission, and powertrain control algorithms using the electric vehicle (EV) reference application.

Charge an Electric Vehicle

Use the EV charging reference application to charge an EV battery through an NACS/Tesla or SAE J1772/CCS coupler, using standard communication protocols.

Develop, Resize, and Calibrate Motors with Dynamometer Test Harness

Develop a control test bench, resize e-motors, and calibrate controllers using the motor dynamometer reference application.

FCEV Reference Application

Simulate an FCEV model with a fuel cell, motor-generator, battery, direct-drive transmission, and associated powertrain control algorithms.

Open Live Script

Analyze Power and Energy

Evaluate and report energy and power losses at the component- and system-level.