Main Content

sectorplot

Compute or plot sector index as function of frequency

Description

sectorplot(H,Q) plots the relative sector indices for the dynamic system H and a given sector matrix Q. These indices measure by how much the sector bound is satisfied (index less than 1) or violated (index greater than 1) at a given frequency. (See About Sector Bounds and Sector Indices for more information about the meaning of the sector index.) sectorplot automatically chooses the frequency range and number of points based on the dynamics of H.

Let the following be an orthogonal decomposition of the symmetric matrix Q into its positive and negative parts.

Q=W1W1TW2W2T,W1TW2=0.

The sector index plot is only meaningful if W2TH has a proper stable inverse. In that case, the sector indices are the singular values of:

(W1TH(jω))(W2TH(jω))1.

If H is a model with complex coefficients, then in:

  • Log frequency scale, the plot shows two branches, one for positive frequencies and one for negative frequencies. The arrows indicate the direction of increasing frequency values for each branch.

  • Linear frequency scale, the plot shows a single branch with a symmetric frequency range centered at a frequency value of zero.

example

sectorplot(H1,H2,...,HN,Q) and plot the sector index for multiple dynamic systems H1,H2,...,HN on the same plot.

sectorplot(H1,LineSpec1,...,HN,LineSpecN,Q) and sectorplot(H1,LineSpec1,...,HN,LineSpecN,Q,w) specify a color, line style, and marker for each system in the plot.

sectorplot(___,w) plots the sector index for frequencies specified by w. You can specify a frequency range or a vector of frequencies.

You can use this syntax with any of the previous input-argument combinations.

sectorplot(___,plotoptions) plots the sector index with the options set specified in plotoptions. You can use these options to customize the plot appearance using the command line. Settings you specify in plotoptions override the preference settings in the MATLAB® session in which you run sectorplot. Therefore, this syntax is useful when you want to write a script to generate multiple plots that look the same regardless of the local preferences.

example

[index,wout] = sectorplot(H,Q) returns the sector index at each frequency in the vector wout. The output index is a matrix, and the value index(:,k) gives the sector indices in descending order at the frequency w(k). This syntax does not draw a plot.

index = sectorplot(H,Q,w) returns the sector indices at the frequencies specified by w.

Examples

collapse all

Plot the sector index to visualize the frequencies at which the I/O trajectories of G(s)=(s+2)/(s+1) lie within the sector defined by:

S={(y,u):0.1u2<uy<10u2}.

In U/Y space, this sector is the shaded region of the following diagram.

The Q matrix for this sector is given by:

a = 0.1;  
b = 10; 
Q = [1 -(a+b)/2 ; -(a+b)/2 a*b];

A trajectory y(t)=Gu(t) lies within the sector S when for all T > 0,

0.10Tu(t)2<0Tu(t)y(t)dt<100Tu(t)2dt.

In the frequency domain, this same condition can be expressed as:

(G(jω)1)HQ(G(jω)1)<0.

To check whether G satisfies or violates this condition at any frequency, plot the sector index for H = [G;1].

G = tf([1 2],[1 1]); 
sectorplot([G;1],Q)

MATLAB figure

The plot shows that the sector index is less than 1 at all frequencies. Therefore, the trajectories of G(s) fit within in the specified sector Q at all frequencies.

Examine the sector plot of a 2-output, 2-input system for a particular sector. Load the system, H1, and define the sector, Q.

load("sectorExampleSystem.mat","H1")
Q = [-5.12   2.16  -2.04   2.17
      2.16  -1.22  -0.28  -1.11
     -2.04  -0.28  -3.35   0.00
      2.17  -1.11   0.00   0.18];

Create the plot.

sectorplot(H1,Q)

MATLAB figure

Because H is 2-by-2, there are two lines on the sector plot. The largest value of the sector index exceeds 1 below about 0.5 rad/s and in a narrow band around 3 rad/s. Therefore, H does not satisfy the sector bound represented by Q.

Plot the relative sector indices of a model with complex coefficients and a model with real coefficients on the same plot.

Create a system with complex coefficients.

A = [-3.50,-1.25-0.25i;2,0];
B = [1;0];
C = [-0.75-0.5i,0.625-0.125i];
D = 0.5;
Hc = [ss(A,B,C,D);1];

Load a system with real coefficients.

load("sectorExampleSystem.mat","Hr")

Plot the relative sector indices of both systems.

Q = [1 0.1;0.1 -1];
sectorplot(Hc,Hr,Q)
legend("Complex-coefficient model","Real-coefficient model", ...
    Location="southwest");

In log frequency scale, the plot shows two branches for models with complex coefficients, one for positive frequencies, with a right-pointing arrow, and one for negative frequencies, with a left-pointing arrow. In both branches, the arrows indicate the direction of increasing frequencies. The plots for models with real coefficients always contain a single branch with no arrows.

Set the plotting frequency scale to linear.

opt = sectorplotoptions;
opt.FreqScale = "Linear";

Plot the indices.

sectorplot(Hc,Hr,Q,opt)
legend("Complex-coefficient model","Real-coefficient model", ...
    Location="southwest");

MATLAB figure

In linear frequency scale, the plots show a single branch with a symmetric frequency range centered at a frequency value of zero. The plot also shows the negative-frequency response of a model with real coefficients when you plot the response along with a model with complex coefficients.

Input Arguments

collapse all

Model to analyze against sector bounds, specified as a dynamic system model such as a tf, ss, or genss model. H can be continuous or discrete. If H is a generalized model with tunable or uncertain blocks, sectorplot analyzes the current, nominal value of H.

To analyze whether all I/O trajectories (u(t),y(t) of a linear system G lie in a particular sector, use H = [G;I], where I = eyes(nu), and nu is the number of inputs of G.

If H is a model array, then sectorplot plots the sector index of all models in the array on the same plot. When you use output arguments to get sector-index data, H must be a single model.

Sector geometry, specified as:

  • A matrix, for constant sector geometry. Q is a symmetric square matrix that is ny on a side, where ny is the number of outputs of H.

  • An LTI model, for frequency-dependent sector geometry. Q satisfies Q(s)’ = Q(–s). In other words, Q(s) evaluates to a Hermitian matrix at each frequency.

The matrix Q must be indefinite to describe a well-defined conic sector. An indefinite matrix has both positive and negative eigenvalues.

For more information, see About Sector Bounds and Sector Indices.

Frequencies at which to compute and plot indices, specified as one of the following:

  • Cell array of the form {wmin,wmax} — Compute the plot indices at frequencies in the range from wmin to wmax. If wmax is greater than the Nyquist frequency of sys, the response is computed only up to the Nyquist frequency.

  • Vector of frequencies — Compute the plot indices at each specified frequency. For example, use logspace to generate a row vector with logarithmically spaced frequency values. The vector w can contain both positive and negative frequencies.

  • [] — Automatically select frequencies based on system dynamics.

For models with complex coefficients, if you specify a frequency range of [wmin,wmax] for your plot, then in:

  • Log frequency scale, the plot frequency limits are set to [wmin,wmax] and the plot shows two branches, one for positive frequencies [wmin,wmax] and one for negative frequencies [–wmax,–wmin].

  • Linear frequency scale, the plot frequency limits are set to [–wmax,wmax] and the plot shows a single branch with a symmetric frequency range centered at a frequency value of zero.

Specify frequencies in units of rad/TimeUnit, where TimeUnit is the TimeUnit property of the model.

Line style, marker, and color, specified as a string or character vector containing symbols. The symbols can appear in any order. You do not need to specify all three characteristics (line style, marker, and color). For example, if you omit the line style and specify the marker, then the plot shows only the marker and no line.

Example: '--or' is a red dashed line with circle markers

Line StyleDescription
"-"Solid line
"--"Dashed line
":"Dotted line
"-."Dash-dotted line
MarkerDescription
"o"Circle
"+"Plus sign
"*"Asterisk
"."Point
"x"Cross
"_"Horizontal line
"|"Vertical line
"s"Square
"d"Diamond
"^"Upward-pointing triangle
"v"Downward-pointing triangle
">"Right-pointing triangle
"<"Left-pointing triangle
"p"Pentagram
"h"Hexagram
ColorDescription
"r"red
"g"green
"b"blue
"c"cyan
"m"magenta
"y"yellow
"k"black
"w"white

Sector index plot options, specified as a SectorPlotOptions object created using sectorplotoptions. You can use these options to customize the plot appearance. Settings you specify in plotoptions override the preference settings for the current MATLAB session.

Output Arguments

collapse all

Sector indices as a function of frequency, returned as a matrix. index contains the sector indices computed at the frequencies w if you supplied them, or wout if you did not. index has as many columns as there are values in w or wout, and as many rows as H has inputs. Thus the value index(:,k) gives the sector indices in descending order at the frequency w(k).

For example, suppose that G is a 3-input, 3-output system, Q is a suitable sector matrix, and w is a 1-by-30 vector of frequencies, then the following syntax returns a 3-by-30 matrix index.

H = [G;eyes(3)]
index = sectorplot(H,Q,w);

The entry index(:,k) contains the three sector indices for H, in descending order, at the frequency w(k).

For more information, see About Sector Bounds and Sector Indices.

Frequencies at which the indices are calculated, returned as a vector. The function automatically chooses the frequency range and number of points based on the dynamics of the model.

wout also contains negative frequency values for models with complex coefficients.

Version History

Introduced in R2016a