Send HDL simulator event ID and process ID to MATLAB server
Issue this command in the HDL simulator, not in MATLAB®. It is only available after the HDL simulator loads the MATLAB library.
sends the HDL simulator event ID and process identification (PID) to the MATLAB server (
hdldaemon) using the specified connection methods
(socket or shared memory). For MATLAB to receive these IDs,
hdldaemon must be running with the same communication mode specified by the
notifyMatlabServer function. The event ID and the PID queue in
notifyMatlabServer is often used with
waitForHdlClient to make sure that the HDL
simulator is ready to begin or continue processing.
Send HDL Simulator Event and Process IDs to MATLAB Server
EventID = 5 is received within 100 seconds, the
function returns the HDL simulator PID. If a time-out occurs, the function returns
>> hdldaemon('socket',5002); ... >> hdlpid = waitForHdlClient(100,5);
In the HDL simulator, use the
notifyMatlabServer command to send
hdldaemon running on the same
machine using TCP/IP socket port
>> notifyMatlabServer 5 -socket 5002
tcp_spec — TCP/IP socket communication
TCP/IP port number | TCP/IP service name | internet address
TCP/IP socket communication for the link between the HDL simulator and MATLAB, specified as a TCP/IP port name or service name. If the MATLAB server is running on a remote host, you must also specify the name or internet address of the remote host. When this input argument is not specified, the function uses shared memory communication.
Introduced in R2012b