## Avoid Unnecessary Copies of Data

### Passing Values to Functions

When calling a function with input arguments, MATLAB® copies the values from the calling function’s workspace into the parameter variables in the function being called. However, MATLAB applies various techniques to avoid making copies of these values when it is not necessary.

MATLAB does not provide a way to define a reference to a value, as in languages like C++. Instead, MATLAB allows multiple output as well as multiple input parameters so that you know what values are going into a function and what values are coming out of the function.

#### Copy-on-Write

If a function does not modify an input argument, MATLAB does not make a copy of the values contained in the input variable.

For example, suppose that you pass a large array to a function.

```A = rand(1e7,1); B = f1(A); ```

The function `f1` multiplies each element in the input array `X` by `1.1` and assigns the result to the variable `Y`.

```function Y = f1(X) Y = X.*1.1; % X is a shared copy of A end ```

Because the function does not modify the input values, the local variable `X` and the variable `A` in the caller's workspace share the data. After `f1` executes, the values assigned to `A` have not changed. The variable `B` in the caller's workspace contains the result of the element-wise multiplication. The input is passed by value. However, no copy is made when calling `f1`.

The function `f2` does modify its local copy of the input variable, causing the local copy to be unshared with input `A`. The value of `X` in the function is now an independent copy of the input variable `A` in the caller's workspace. When `f2` returns the result to the caller's workspace, the local variable `X` is destroyed.

```A = rand(1e7,1); B = f2(A); ```
```function Y = f2(X) X = X.*1.1; % X is an independent copy of A Y = X; % Y is a shared copy of X end ```

#### Passing Inputs as MATLAB Expressions

You can use the value returned from a function as an input argument to another function. For example, use the `rand` function to create the input for the function `f2` directly.

```B = f2(rand(1e7,1)); ```

The only variable holding the value returned by `rand` is the temporary variable `X` in the workspace of the function `f2`. There is no shared or independent copy of these values in the caller's workspace. Directly passing function outputs saves the time and memory required to create a copy of the input values in the called function. This approach makes sense when the input values are not used again.

#### Assigning In-Place

When you do not need to preserve the original input values, you can assign the output of a function to the same variable that you provided as input.

```A = f2(A); ```

In-place assignment follows the copy-on-write behavior described previously: modifying the input variable values results in a temporary copy of those values.

MATLAB can apply memory optimizations under certain conditions. Consider the following example. The `canBeOptimized` function creates a large array of random numbers in the variable `A`. Then it calls the local function `fLocal`, passing `A` as the input, and assigning the output of the local function to the same variable name.

```function canBeOptimized A = rand(1e7,1); A = fLocal(A); end function X = fLocal(X) X = X.*1.1; end ```

Because the call to the local function, `A = fLocal(A)`, assigns the output to the variable `A`, MATLAB does not need to preserve the original value of `A` during execution of the function. Modifications made to `X` inside `fLocal` do not result in a copy of the data. The assignment `X = X.*1.1` modifies `X` in place, without allocating a new array for the result of the multiplication. Eliminating the copy in the local function saves memory and improves execution speed for large arrays.

However, MATLAB cannot apply this optimization if the assignment in the local function requires array indexing. For example, modifying the cell array created in `updateCells` requires indexing into `X` in the local function `gLocal`. For every loop iteration `i`, the looped assignment in the form ```X{i} = X{i}*1.1``` results in a temporary variable the same size as `X{i}` for evaluating and storing the value of `X{i}*1.1`. MATLAB destroys the temporary variable after assigning its value to `X{i}`.

```function updateCells C = num2cell(rand(1e7,1)); C = gLocal(C); end function X = gLocal(X) for i = 1:length(X) X{i} = X{i}*1.1; end end ```

Several additional restrictions apply. MATLAB cannot apply memory optimization when it is possible to use the variable after the function throws an error. Therefore, this optimization is not applied in scripts, on the command line, in calls to `eval`, or to code inside `try/catch` blocks. Also, MATLAB does not apply memory optimization when the original variable is directly accessible during execution of the called function. For example, if `fLocal` was a nested function, MATLAB could not apply the optimization because variables can be shared with the parent function. Finally, MATLAB does not apply memory optimization when the assigned variable is declared as global or persistent.

#### Debugging Code That Uses In-Place Assignment

When MATLAB applies in-place optimization to an assignment statement, the variable on the left side of the assignment is set to a temporary state that makes it inaccessible before MATLAB executes the right side of the assignment statement. If MATLAB stops in the debugger before the result of executing the right-side of the statement has been assigned to the variable, examining the left-side variable can produce an error indicating that the variable is unavailable.

For example, this function has a mismatch in the dimensions of variables `A` and `B`.

```function A = inPlace A = rand(100); B = rand(99); dbstop if error A = A.*B; end ```

Executing the function throws an error and stops in the debugger.

```inPlace ```
```Matrix dimensions must agree. Error in inPlace (line 5) A = A.*B; 5 A = A.*B; ```

Attempting to see the value of the variable `A` while in debug mode results in an error because the variable is temporarily unavailable.

`K>> A`
```Variable "A" is inaccessible. When a variable appears on both sides of an assignment statement, the variable may become temporarily unavailable during processing. ```

To gain more flexibility when debugging, refactor your code to remove the in-place assignment. For example, assign the result to another variable.

```function A = inPlace A = rand(100); B = rand(99); dbstop if error % Assign result to C instead of A C = A.*B; A = C; end ```

Then the variable A is visible while in the debugger.

### Why Pass-by-Value Semantics

MATLAB uses pass-by-value semantics when passing arguments to functions and returning values from functions. In some cases, pass-by-value results in copies of the original values being made in the called function. However, pass-by-value semantics provides certain advantages.

When calling functions, you know that the input variables are not modified in the caller's workspace. Therefore, you do not need to make copies of inputs inside a function or at a call site just to guard against the possibility that these values might be modified. Only the variables assigned to returned values are modified.

Also, you avoid the possibility of corrupting workspace variables if an error occurs within a function that has been passed a variable by reference.

### Handle Objects

There are special kinds of objects called handles. All variables that hold copies of the same handle can access and modify the same underlying object. Handle objects are useful in specialized circumstances where an object represents a physical object such as a window, plot, device, or person rather than a mathematical object like a number or matrix.

Handle objects derive from the `handle` class, which provides functionality such as events and listeners, destructor methods, and support for dynamic properties.

For more information about values and handles, see Comparison of Handle and Value Classes and Which Kind of Class to Use.