## Optimize Live Editor Task with `lsqlin`

Solver

This example shows how to use the Optimize Live Editor task to solve a constrained least-squares problem.

The problem in this example is to find the point on the plane *x*_{1} + 2*x*_{2} + 4*x*_{3} = 7 that is closest to the origin. The easiest way to solve this problem
is to minimize the square of the distance from a point *x* = (*x*_{1},*x*_{2},*x*_{3}) on the plane to the origin, which returns the same optimal point as
minimizing the actual distance. Because the square of the distance from an arbitrary
point (*x*_{1},*x*_{2},*x*_{3}) to the origin is $${x}_{1}^{2}+{x}_{2}^{2}+{x}_{3}^{2}$$, you can describe the problem as follows:

$$\underset{x}{\mathrm{min}}f(x)={x}_{1}^{2}+{x}_{2}^{2}+{x}_{3}^{2},$$

subject to the constraint

x_{1} + 2x_{2} + 4x_{3} = 7. | (1) |

The function *f*(*x*) is the *objective
function* and *x*_{1} + 2*x*_{2} + 4*x*_{3} = 7 is an *equality constraint*. More complicated
problems might contain other equality constraints, inequality constraints, and upper or
lower bound constraints.

### Set Up and Solve the Problem Using Optimize

Set up the problem with the `lsqlin`

solver in the
Optimize Live Editor task.

Create a new live script by clicking the

**New Live Script**button in the**File**section on the**Home**tab.Insert an Optimize Live Editor task. Click the

**Insert**tab and then, in the**Code**section, select**Task > Optimize**.Click the

**Solver-based**button. The Optimize task opens.In the

**Specify problem type**section of the task, select**Objective > Least squares**and**Constraints > Linear equality**.The task selects

`lsqlin`

as the recommended solver.To get the data

`C`

and`d`

into the MATLAB^{®}workspace, click the**Section Break**button on the**Insert**tab. In the new section, enter the following code.C = eye(3); d = zeros(3,1);

Set the linear equality constraint matrix and vector.

Aeq = [1 2 4]; beq = 7;

Run the section by pressing

**Ctrl+Enter**. This places the variables into the workspace.In the

**Select problem data**section of the task, set the entries to their corresponding values.Run the solver by pressing

**Ctrl+Enter**. View the exit message.To find the solution, look at the top of the task.

The solver returns the variables

`solution`

and`objectiveValue`

to the MATLAB workspace.Insert a section break below the task. Place these lines in the new section.

disp(solution) disp(objectiveValue)

Run the section by pressing

**Ctrl+Enter**.