Model LC bandstop tee network
Ladder Filters sublibrary of the Physical library
The LC Bandstop Tee block models the LC bandstop tee network described in the block dialog box, in terms of its frequency-dependent S-parameters.
For each inductor and capacitor pair in the network, the block first calculates the ABCD-parameters at each frequency contained in the vector of modeling frequencies. For each series pair, A = 1, B = Z, C = 0, and D = 1, where Z is the impedance of the series pair. For each shunt pair, A = 1, B = 0, C = Y, and D = 1, where Y is the admittance of the shunt pair.
The LC Bandstop Tee block then cascades the ABCD-parameters
for each series and shunt pair at each of the modeling frequencies,
and converts the cascaded parameters to S-parameters using the RF Toolbox™
See the Output Port block for information about determining the modeling frequencies.
The LC bandstop tee network object is a two-port network as shown in the following circuit diagram.
[L1, L2, L3,
L4, ...] is the value of the
and [C1, C2, C3,
C4, ...] is the value of the
Vector containing the inductances, in order from source to load, of all inductors in the network. The inductance vector must contain at least three elements. All values must be strictly positive.
Vector containing the capacitances, in order from source to load, of all capacitors in the network. Its length must be equal to the length of the vector you provide in the Inductance parameter. All values must be strictly positive.
For information about plotting, see Create Plots.
See the LC Bandpass Pi block for an example of an LC filter.
 Ludwig, Reinhold and Pavel Bretchko, RF Circuit Design: Theory and Applications, Prentice-Hall, 2000.
 Zverev, Anatol I., Handbook of Filter Synthesis, John Wiley & Sons, 1967.