Check length of folder name at every level of model path
Guideline: jc_0242: Length restriction for folder names
Checks the length of the folder names at every level of the model path to see if all the folders in the path adhere to the minimum and maximum length restriction specified by the input parameters.
The default values for the maximum and minimum lengths are 63 and 1, respectively.
This check requires a Simulink® Check™ license.
This check does not include sub-checks because the MAB modeling guideline provides only one sub ID.
For reference, the MAB guideline sub ID(s) that are recommended for use by the NA-MAAB and JMAAB modeling standards organizations are:
NA-MAAB — a
JMAAB — a
You can configure the following input parameters to customize the check action:
|Input Parameter||Value||Default Value|
|Minimum length||Minimum length for the folder path.||1|
|Maximum length||Maximum length for the folder path.||63|
|Overall number of characters in path name||Total length (no of characters) for the folder path.||Disabled|
|Project Directory||Project path address.||Not configured|
For example, consider that a Simulink model is present in the following directory:
'C:\Desktop\Project\TrafficLamp\architecture\model'. The Project
Directory field is not configured. When you run the check for this model,
each of the folder names in the model path, that is
model is individually checked for compliance with the maximum
If you specify the Project Directory as
'C:\Desktop\Project', then only the folder names inside the project directory, that is
model are checked for compliance.
Results and Recommended Actions
|Length of the folder names at every level of the model path does not adhere to the length restriction of 63 characters.||Modify the folder names that do not meet the length restriction of 63 characters throughout the path.|
Capabilities and Limitations
This check does not have additional capabilities or limitations