Check length of signal and bus names
Guideline: jc_0245: Length restriction for signal and bus names
Checks if the length of the signal or bus names adheres to the maximum length restriction of 63 characters.
This check requires a Simulink® Check™ license.
This check does not include sub-checks because the MAB modeling guideline provides only one sub ID.
For reference, the MAB guideline sub ID(s) that are recommended for use by the NA-MAAB and JMAAB modeling standards organizations are:
NA-MAAB — a
JMAAB — a
You can configure the following input parameters to customize the check action:
|Input Parameter||Value||Default Value|
|Minimum length||Minimum length for the folder path.||1|
|Maximum length||Maximum length for the folder path.||64|
Results and Recommended Actions
|Signal or bus name in the model does not adhere to the length restriction of 63 characters.||Modify the signal or the bus names in the model so that the length of the names is not more than 63 characters.|
Capabilities and Limitations
Runs on library models.
Analyzes content in masked subsystems. By default, the input parameter Look under masks is set to
Analyzes content of library-linked blocks. By default, the input parameter Follow links is set to
Allows exclusions of blocks and charts.