Check model diagnostic parameters
Guideline: jc_0021: Model diagnostic settings
Model Advisor checks that these diagnostics configuration parameters are set as defined in the Results and Recommended Actions section below:
This check requires a Simulink® Check™ license.
This Model Advisor check is not applicable for JMAAB modeling guidelines.
This check does not include sub-checks.
For reference, the MAB guideline sub ID(s) that are recommended for use by the NA-MAAB and JMAAB modeling standards organizations are:
NA-MAAB — a
JMAAB — Not supported
Results and Recommended Actions
|Algebraic loop is set to
||Set Algebraic loop to
|Minimize algebraic loop is set to
||Set Minimize algebraic loop to
|Inf or NaN block output is set to
||Set Inf or NaN block output to
|Duplicate data store names is set to
||Set Duplicate data store names to
|Unconnected block input ports is set to
||Set Unconnected block input ports to
|Unconnected block output ports is set to
||Set Unconnected block output ports to
|Unconnected line is set to
||Set Unconnected line to
|Unspecified bus object at root Outport block is
||Set Unspecified bus object at root Outport block
|Element name mismatch is set to
||Set Element name mismatch to
Capabilities and Limitations
Does not run on library models.
Does not allow exclusions of blocks or charts.