Radio I/O
Transmit and receive real-world RF signals
When transmitting or receiving real-world RF signals, use I/O properties and techniques to perform single channel I/O, detect lost samples, apply burst mode buffering, and repeatedly transmit a waveform.
Functions
sdrrx | Create receiver System object for radio hardware |
sdrtx | Create transmitter System object for radio hardware |
capture | Capture RF signal data using SDR device |
designCustomFilter | Design custom filter for Analog Devices AD936x RF chip |
info | Obtain radio information |
transmitRepeat | Download waveform to radio and repeatedly transmit it over the air |
Blocks
| Pluto Receiver | Receive data from Analog Devices ADALM-PLUTO radio |
| Pluto Transmitter | Transmit data to Analog Devices ADALM-PLUTO radio |
Objects
comm.SDRRxPluto | Receive data from Analog Devices ADALM-PLUTO radio |
comm.SDRTxPluto | Transmit data to Analog Devices ADALM-PLUTO radio |
Topics
- Channel I/O
Use ADALM-PLUTO radio channels to send and receive data.
- Repeated Waveform Transmitter
Use a transmitter System object™ for repeated signal transmission.
- Detect Underruns and Overruns
To detect underruns and overruns, use the lost sample indicator.
- Burst Mode
To achieve real time performance, enable burst mode.
Troubleshooting
Resolve issues encountered while installing or using the features of the support package.
Featured Examples
Capture RF Data to Baseband File Using ADALM-PLUTO Radio
Capture an FM broadcast signal using an ADALM-PLUTO radio, save the signal to a file as baseband samples, and demodulate the baseband samples.
