cdma2000ForwardReferenceChannels

Define cdma2000 forward reference channel

Syntax

cfg = cdma2000ForwardReferenceChannels(wv)

cfg = cdma2000ForwardReferenceChannels(wv,numchips)

cfg = cdma2000ForwardReferenceChannels(BSTM-RC,numchips,P,M)

cfg = cdma2000ForwardReferenceChannels(traffic,numchips,F-SCH-SPEC)

Description

cfg = cdma2000ForwardReferenceChannels(wv) returns a structure, cfg, that defines the cdma2000^® forward link parameters given the input waveform identifier, wv. To generate a forward link reference channel waveform, pass this structure to the cdma2000ForwardWaveformGenerator function.

For all syntaxes, cdma2000ForwardReferenceChannels creates a configuration structure that is compliant with the cdma2000 physical layer specification [1].

example

cfg = cdma2000ForwardReferenceChannels(wv,numchips) specifies the number of chips to generate.

example

cfg = cdma2000ForwardReferenceChannels(BSTM-RC,numchips,P,M) returns the data structure for the BSTM-RC waveform identifiers, given the total traffic channel power, P, and the number of traffic channels, M. For more information on base station testing, see Table 6.5.2-1 of [2].

example

cfg = cdma2000ForwardReferenceChannels(traffic,numchips,F-SCH-SPEC) returns the data structure for the specified traffic channel, traffic, and the forward supplemental channel (F-SCH) and frame length combination, F-SCH-SPEC. If omitted, F-SCH-SPEC has a default value of the lowest F-SCH data rate allowable for a 20 ms frame length, given the radio configuration specified by traffic.

example

Examples

collapse all

Generate Waveform for RC2 Forward Traffic Channels

Open Live Script

Create a parameter structure, config, for all forward traffic channels (F-FCH and F-SCCH) that are supported by radio configuration 2.

config = cdma2000ForwardReferenceChannels('ALL-RC2')

config = struct with fields:
          SpreadingRate: 'SR1'
              Diversity: 'NTD'
                    QOF: 'QOF1'
               PNOffset: 0
          LongCodeState: 0
     PowerNormalization: 'Off'
      OversamplingRatio: 4
             FilterType: 'cdma2000Long'
                InvertQ: 'Off'
       EnableModulation: 'Off'
    ModulationFrequency: 0
               NumChips: 1000
                  FPICH: [1x1 struct]
                 FAPICH: [1x1 struct]
                FTDPICH: [1x1 struct]
               FATDPICH: [1x1 struct]
                   FPCH: [1x1 struct]
                  FSYNC: [1x1 struct]
                  FBCCH: [1x1 struct]
                  FCACH: [1x1 struct]
                  FCCCH: [1x1 struct]
                 FCPCCH: [1x1 struct]
                  FQPCH: [1x1 struct]
                   FFCH: [1x1 struct]
                  FOCNS: [1x1 struct]
                  FSCCH: [1x1 struct]

Examine the fields for the Forward Fundamental Channel (F-FCH). The data rate is 14,400 bps and the frame length is 20 ms.

config.FFCH

ans = struct with fields:
                Enable: 'On'
                 Power: 0
    RadioConfiguration: 'RC2'
              DataRate: 14400
           FrameLength: 20
          LongCodeMask: 0
          EnableCoding: 'On'
            DataSource: {'PN9'  [1]}
             WalshCode: 7
             EnableQOF: 'Off'
    PowerControlEnable: 'Off'

Generate the complex waveform using the corresponding waveform generator function.

waveform = cdma2000ForwardWaveformGenerator(config);

A waveform composed of the channels specified by each substructure of config is generated by cdma2000ForwardWaveformGenerator.

Generate CDMA200 Waveform Containing Sync Channel Message

Open Live Script

Create a reference channel, specify the sync channel message as the data source, add the SyncMessage structure to the FSYNC substructure. Generate the waveform using this reference channel configuration.

Create a reference channel for testing a base station using radio configuration 3.

config = cdma2000ForwardReferenceChannels('BSTM-RC3');

Adjust the Forward Sync Channel (F-SYNC) settings. Set a relative channel power of 0.0 dB and specify the sync channel message as the data source.

config.FSYNC.Power = 0.0;
config.FSYNC.DataSource = 'SyncMessage';

Define the sync channel message structure (for P_REV = 6 (IS-2000-0)) and add it to the config.FSYNC substructure. Display the FSYNC structure.

sm = struct();
sm.P_REV = 6;                          % Protocol revision field
sm.MIN_P_REV = 6;                      % Minimum protocol revision field
sm.SID = hex2dec('14B');               % System identifier field
sm.NID = 1;                            % Network identification field
sm.PILOT_PN = 0;                       % Pilot PN offset field
sm.LC_STATE = hex2dec('20000000000');  % Long code state field
sm.SYS_TIME = hex2dec('36AE0924C');    % System time field
sm.LP_SEC = 0;                         % Leap second field
sm.LTM_OFF = 0;                        % Local time offset field
sm.DAYLT = 0;                          % Daylight saving time indicator field
sm.PRAT = 0;                           % Paging channel data rate field
sm.CDMA_FREQ = hex2dec('2F6');         % CDMA frequency field
sm.EXT_CDMA_FREQ = hex2dec('2F6');     % Extended CDMA frequency field

config.FSYNC.SyncMessage = sm;

config.FSYNC

ans = struct with fields:
          Enable: 'On'
           Power: 0
    EnableCoding: 'On'
      DataSource: 'SyncMessage'
     SyncMessage: [1x1 struct]

Generate the forward link waveform.

waveform = cdma2000ForwardWaveformGenerator(config);

Generate F-CCCH Waveform

Open Live Script

Create a structure for a 2000-chip forward common control channel (F-CCCH). Specify a 38,400 bps data rate, a 5 ms frame length, and an accompanying broadcast control channel (F-BCCH) with a 9600 bps data rate.

config   = cdma2000ForwardReferenceChannels('CONTROL-38400-5-9600',2000)

config = struct with fields:
          SpreadingRate: 'SR1'
              Diversity: 'NTD'
                    QOF: 'QOF1'
               PNOffset: 0
          LongCodeState: 0
     PowerNormalization: 'Off'
      OversamplingRatio: 4
             FilterType: 'cdma2000Long'
                InvertQ: 'Off'
       EnableModulation: 'Off'
    ModulationFrequency: 0
               NumChips: 2000
                  FPICH: [1x1 struct]
                   FPCH: [1x1 struct]
                  FCCCH: [1x1 struct]
                  FBCCH: [1x1 struct]

Verify that the F-CCCH and F-BCCH data rates are 38,400 bps and 9600 bps, respectively.

config.FCCCH.DataRate

ans = 
38400

config.FBCCH.DataRate

ans = 
9600

Generate the forward link waveform.

waveform = cdma2000ForwardWaveformGenerator(config);

Generate Waveform for Base Station Testing

Open Live Script

Create a reference channel for testing a base station using radio configuration 3. Specify the number of chips, the total power allocated to the individual channels, and the number of traffic channels. The FFCH substructure is a structure array whose dimensions are set by the number of traffic channels.

config = cdma2000ForwardReferenceChannels('BSTM-RC3',1000,-3,4)

config = struct with fields:
          SpreadingRate: 'SR1'
              Diversity: 'NTD'
                    QOF: 'QOF1'
               PNOffset: 0
          LongCodeState: 0
     PowerNormalization: 'Off'
      OversamplingRatio: 4
             FilterType: 'cdma2000Long'
                InvertQ: 'Off'
       EnableModulation: 'Off'
    ModulationFrequency: 0
               NumChips: 1000
                  FPICH: [1x1 struct]
                  FSYNC: [1x1 struct]
                   FPCH: [1x1 struct]
                   FFCH: [1x4 struct]

Verify that the length of the FFCH substructure corresponds to the number of specified traffic channels, 4.

length(config.FFCH)

ans = 
4

Generate the forward link waveform.

waveform = cdma2000ForwardWaveformGenerator(config);

Generate F-SCH Waveform

Open Live Script

Create a traffic channel using radio configuration 7 composed of a 614,400 bps forward supplemental channel (F-SCH) having a 20 ms frame length. Set the number of chips to 5000.

config = cdma2000ForwardReferenceChannels('TRAFFIC-RC7-4800', ...
    5000,'F-SCH-614400-20')

config = struct with fields:
          SpreadingRate: 'SR3'
              Diversity: 'NTD'
                    QOF: 'QOF1'
               PNOffset: 0
          LongCodeState: 0
     PowerNormalization: 'Off'
      OversamplingRatio: 4
             FilterType: 'cdma2000Long'
                InvertQ: 'Off'
       EnableModulation: 'Off'
    ModulationFrequency: 0
               NumChips: 5000
                  FPICH: [1x1 struct]
                   FFCH: [1x1 struct]
                   FSCH: [1x1 struct]

This channel uses spreading rate 3, 'SR3', which has a 3.75 MHz bandwidth.

Generate the forward link waveform.

waveform = cdma2000ForwardWaveformGenerator(config);

Input Arguments

collapse all

`wv` — Waveform identification
character vector

Waveform identification of the reference channel, specified as a character vector. The input typically identifies the channel type, radio configuration, data rate, and frame length. To specify wv, connect the substrings with hyphens, for example, 'CONTROL-19200-10-4800'.

Parameter Field	Values				Description
Parameter Field	Substring 1	Substring 2	Substring 3	Substring 4	Description
`wv`	`'FPICH-ONLY'`				Generates a waveform containing a pilot channel only.
	`'CONTROL'`	`9600`	`20`	`4800` \| `9600` \| `19200`	Character vector representing the forward common control channel (F-CCCH) data rate in bps, the frame length in ms, and the forward broadcast control channel (F-BCCH) data rate in bps. Specify `'CONTROL-9600-20-9600'` to create a structure variable, `wv`, with a 9600 bps F-CCCH data rate, a 20 ms frame length, and a 9600 bps F-BCCH data rate.
		`19200`	`10` \| `20`
		`38400`	`5` \| `10` \| `20`
	`'TRAFFIC'`	`RC1`	`1200` \| `2400` \| `4800` \| `9600`	N/A	Character vector representing the radio configuration and the forward fundamental channel (F-FCH) data rate in bps. Specify `'TRAFFIC-RC9-14400'` to create a channel with radio configuration 9 having a 14400 bps F-FCH data rate.
		`RC2` \| `RC5` \| `RC8` \| `RC9`	`1800` \| `3600` \| `7200` \| `14400`
		`RC3` \| `RC4` \| `RC6` \| `RC7`	`1500` \| `2700` \| `4800` \| `9600`
	`'BSTM'`	`RC1` \| `RC2` \| `RC3` \| `RC4` \| `RC5` \| `RC6` \| `RC7` \| `RC8` \| `RC9`	N/A	N/A	Models for testing the base station transmitter. Specify `'BSTM-RC1'` to create a structure for base station testing with radio configuration 1.
	`'ALL'`	`RC1` \| `RC2` \| `RC3` \| `RC4` \| `RC5` \| `RC6` \| `RC7` \| `RC8` \| `RC9`	N/A	N/A	Returns all channels that are supported for the specified radio configuration. Specify `'ALL-RC4'` to create a structure containing all traffic channels for radio configuration 4.

Example: 'CONTROL-9600-20-9600'

Example: 'TRAFFIC-RC9-7200'

Example: 'ALL-RC5'

Data Types: char

`numchips` — Number of chips
`1000` (default) | positive integer scalar

Number of chips, specified as a positive integer.

Example: 1024

Data Types: double

`BSTM-RC` — BSTM reference channel type
`'BSTM-RC1'` | `'BSTM-RC2'` | `'BSTM-RC3'` | `'BSTM-RC4'` | `'BSTM-RC5'` | `'BSTM-RC6'` | `'BSTM-RC7'` | `'BSTM-RC8'` | `'BSTM-RC9'`

BSTM reference channel type, specified as a character vector. For more information, see Table 6.5.2-1 of [2].

Example: 'BSTM-RC8'

Data Types: char

`P` — Power budget allocated to traffic channels
`0` (default) | real scalar

Power budget allocated to all traffic channels, specified in decibels as a real scalar.

Example: 5

Data Types: double

`M` — Number of traffic channels
`6` (default) | positive integer scalar

Number of traffic channels, specified as a positive integer.

Example: 8

Data Types: double

`traffic` — Traffic configuration
character vector

Traffic channel configuration, specified as a character vector. The table shows the supported traffic channel configurations.

Radio Configuration	Traffic Channel Configuration
1	`'TRAFFIC-RC1-1200'`	`'TRAFFIC-RC1-2400'`	`'TRAFFIC-RC1-4800'`	`'TRAFFIC-RC1-9600'`
2	`'TRAFFIC-RC2-1800'`	`'TRAFFIC-RC2-3600'`	`'TRAFFIC-RC2-7200'`	`'TRAFFIC-RC2-14400'`
3	`'TRAFFIC-RC3-1500'`	`'TRAFFIC-RC3-2700'`	`'TRAFFIC-RC3-4800'`	`'TRAFFIC-RC3-9600'`
4	`'TRAFFIC-RC4-1500'`	`'TRAFFIC-RC4-2700'`	`'TRAFFIC-RC4-4800'`	`'TRAFFIC-RC4-9600'`
5	`'TRAFFIC-RC5-1800'`	`'TRAFFIC-RC5-3600'`	`'TRAFFIC-RC5-7200'`	`'TRAFFIC-RC5-14400'`
6	`'TRAFFIC-RC6-1500'`	`'TRAFFIC-RC6-2700'`	`'TRAFFIC-RC6-4800'`	`'TRAFFIC-RC6-9600'`
7	`'TRAFFIC-RC7-1500'`	`'TRAFFIC-RC7-2700'`	`'TRAFFIC-RC7-4800'`	`'TRAFFIC-RC7-9600'`
8	`'TRAFFIC-RC8-1800'`	`'TRAFFIC-RC8-3600'`	`'TRAFFIC-RC8-7200'`	`'TRAFFIC-RC8-14400'`
9	`'TRAFFIC-RC9-1800'`	`'TRAFFIC-RC9-3600'`	`'TRAFFIC-RC9-7200'`	`'TRAFFIC-RC9-14400'`

Example: 'TRAFFIC-RC6-4800' is a traffic channel that uses radio configuration 6 with a 4800 bps data rate.

Data Types: char

`F-SCH-SPEC` — Forward supplemental channel data rate and frame length
character vector

Forward supplemental channel data rate and frame length, specified as a character vector. The supported data rate and frame length combinations are summarized in the table.

Radio Configuration	Frame Length
Radio Configuration	20 ms	40 ms	80 ms
3 \| 4 \| 6 \| 7	`'F-SCH-1500-20'` \| `'F-SCH-2700-20'` \| `'F-SCH-4800-20'` \| `'F-SCH-9600-20'` \| `'F-SCH-19200-20'` \| `'F-SCH-38400-20'` \| `'F-SCH-76800-20'` \| `'F-SCH-153600-20'`	`'F-SCH-1350-40'` \| `'F-SCH-2400-40'` \| `'F-SCH-4800-40'` \| `'F-SCH-9600-40'` \| `'F-SCH-19200-40'` \| `'F-SCH-38400-40'` \| `'F-SCH-76800-40'`	`'F-SCH-1200-80'` \| `'F-SCH-2400-80'` \| `'F-SCH-4800-80'` \| `'F-SCH-9600-80'` \| `'F-SCH-19200-80'` \| `'F-SCH-38400-80'`
4 \| 6 \| 7	`'F-SCH-307200-20'`	`'F-SCH-153600-40'`	`'F-SCH-76800-80'`
7	`'F-SCH-614400-20'`	`'F-SCH-307200-40'`	`'F-SCH-153600-80'`
5 \| 8 \| 9	`'F-SCH-1800-20'` \| `'F-SCH-3600-20'` \| `'F-SCH-7200-20'` \| `'F-SCH-14400-20'` \| `'F-SCH-28800-20'` \| `'F-SCH-57600-20'` \| `'F-SCH-115200-20'` \| `'F-SCH-230400-20'`	`'F-SCH-1800-40'` \| `'F-SCH-3600-40'` \| `'F-SCH-7200-40'` \| `'F-SCH-14400-40'` \| `'F-SCH-28800-40'` \| `'F-SCH-57600-40'` \| `'F-SCH-115200-40'`	`'F-SCH-1800-80'` \| `'F-SCH-3600-80'` \| `'F-SCH-7200-80'` \| `'F-SCH-14400-80'` \| `'F-SCH-28800-80'` \| `'F-SCH-57600-80'`
8 \| 9	`'F-SCH-460800-20'`	`'F-SCH-230400-40'`	`'F-SCH-115200-80'`
9	`'F-SCH-1036800-20'`	`'F-SCH-518400-40'`	`'F-SCH-259200-80'`

For more data rate information for the cdma2000 forward links, see tables 3.1.3.1.3-2 and 3.1.3.1.3-4 of [1].

Example: 'F-SCH-460800-20' is a supplemental channel with a 460,800 bps data rate and a 20 ms frame length.

Data Types: char

Output Arguments

collapse all

`cfg` — Configuration of the parameters and channels used by the waveform generator
structure

Configuration of the parameters and channels used by the waveform generator. The configuration structure is defined in these tables.

Top-Level Parameters and Substructures

Parameter Field	Values	Description
`SpreadingRate`	`'SR1'` \| `'SR3'`	Spreading rate of the waveform. `SR1` corresponds to a 1.2288 Mcps carrier. `SR3` corresponds to a 3.6864 Mcps carrier. SR3 supports direct sequence spreading only.
`Diversity`	`'NTD'` \| `'OTD'` \| `'STS'`	Transmit diversity type (applicable only for `SR1`), where `NTD` is no transmit diversity, `OTD` is orthogonal transmit diversity, and `STS` is space time spreading
`QOF`	`'QOF1'` \| `'QOF2'` \| `'QOF3'`	Quasi-orthogonal function type
`PNOffset`	Nonnegative scalar integer	PN offset of the base station
`LongCodeState`	Positive scalar integer	Initial long code state
`PowerNormalization`	`'Off'` \| `'NormalizeTo0dB'` \| `'NoiseFillTo0dB'`	Power normalization of the waveform
`NumChips`	Positive scalar integer	Number of chips in the waveform
`FilterType`	`'cdma2000Long'` \| `'cdma2000Short'` \| `'Off'` \| `'Custom'`	Type of output filtering
`CustomFilterCoefficients`	Real vector	Custom filter coefficients, used only when the `FilterType` field is set to `'Custom'`
`OversamplingRatio`	Positive scalar integer	Oversampling ratio at output
`InvertQ`	`'Off'` \| `'On'`	Negate the quadrature output
`EnableModulation`	`'Off'` \| `'On'`	Enable carrier modulation
`ModulationFrequency`	Nonnegative scalar integer	Carrier modulation frequency (applies when `EnableModulation` is `'On'`)
`FPICH`	Structure	See `FPICH` Substructure. Optional.
`FAPICH`	Structure	See `FAPICH` Substructure. Optional.
`FTDPICH`	Structure	See `FTDPICH` Substructure. Optional.
`FATDPICH`	Structure	See `FATDPICH` Substructure. Optional.
`FSYNC`	Structure	See `FSYNC` Substructure. Optional.
`FPCH`	Structure	See `FPCH` Substructure. Optional.
`FCCCH`	Structure	See `FCCCH` Substructure. Optional.
`FCACH`	Structure	See `FCACH` Substructure. Optional.
`FQPCH`	Structure	See `FQPCH` Substructure. Optional.
`FCPCCH`	Structure	See `FCPCCH` Substructure. Optional.
`FBCCH`	Structure	See `FBCCH` Substructure. Optional.
`FFCH`	Structure	See `FFCH` Substructure. Optional.
`FDCCH`	Structure	See `FDCCH` Substructure. Optional.
`FSCCH`	Structure	See `FSCCH` Substructure. Optional.
`FSCH`	Structure	See `FSCH` Substructure. Optional.
`FOCNS`	Structure	See `FOCNS` Substructure. Optional.

FPICH Substructure

Include the FPICH substructure in the cfg structure to configure the forward pilot channel (F-PICH). The FPICH substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'` \| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)

FAPICH Substructure

Include the FAPICH substructure in the cfg structure to configure the forward auxiliary pilot channel (F-APICH). The FAPICH substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'` \| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)
`WalshLength`	`64` \| `128` \| `256` \| `512`	Walsh code length
`WalshCode`	Nonnegative integer scalar, such that 0 ≤ `WalshCode` ≤ `WalshLength` – 1	Walsh code number
`LongCodeMask`	Positive scalar integer	Long code identifier

FTDPICH Substructure

Include the FTDPICH substructure in the cfg structure to configure the forward transmit diversity pilot Channel (F-TDPICH). The FTDPICH substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'` \| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)

FATDPICH

Include the FATDPICH substructure in the cfg structure to configure the forward auxiliary transmit diversity pilot channel (F-ATDPICH). The FATDPICH substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'` \| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)
`WalshLength`	`64` \| `128` \| `256`, `512`	Walsh code length
`WalshCode`	Nonnegative integer scalar, such that 0 ≤ `WalshCode` ≤ `WalshLength` – 1	Walsh code number
`LongCodeMask`	Positive scalar integer	Long code identifier

FSYNC Substructure

Include the FSYNC substructure in the cfg structure to configure the forward sync channel (F-SYNC). The FSYNC substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'` \| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)
`EnableCoding`	`'On'` \| `'Off'`	Enable or disable channel coding
`DataSource`	Cell array: `{'PN Type', RN Seed}`, binary vector, or `'SyncMessage'`. Standard PN types are `'PN9'`, `'PN15'`, `'PN23'`, `'PN9-ITU'`, and `'PN11'`.	Data source. Specify a standard PN sequence with a random number seed, a binary vector, or a `'SyncMessage'` character vector.
`SyncMessage`	Structure	See `SyncMessage` Substructure. Optional.

SyncMessage Substructure

If the DataSource field of the FSYNC substructure is set to 'SyncMessage', add the SyncMessage substructure to the cfg.FSYNC substructure to configure the sync channel message. The SyncMessage substructure contains these fields.

Parameter Field	Typical Value	Description
P_REV	`6`	Protocol revision
MIN_P_REV	`6`	Minimum protocol revision
SID	`hex2dec('14B')`	System identifier
NID	`1`	Network identification
PILOT_PN	`0`	Pilot PN offset
LC_STATE	`hex2dec('20000000000')`	Long code state
SYS_TIME	`hex2dec('36AE0924C')`	System time
LP_SEC	`0`	Leap second
LTM_OFF	`0`	Local time offset
DAYLT	`0`	Daylight saving time indicator
PRAT	`0`	Paging channel data rate
CDMA_FREQ	`hex2dec('2F6')`	CDMA frequency
EXT_CDMA_FREQ	`hex2dec('2F6')`	Extended CDMA frequency

FPCH Substructure

Include the FPCH substructure in the cfg substructure to configure the forward paging channel (F-PCH). The FPCH substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'` \| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)
`DataRate`	`4800` \| `9600`	Data rate (bps)
`LongCodeMask`	Positive scalar integer	Long code identifier
`WalshCode`	Nonnegative integer scalar, such that 0 ≤ `WalshCode` ≤ 7	Walsh code number
`EnableCoding`	`'On'` \| `'Off'`	Enable or disable channel coding
`DataSource`	Cell array: `{'PN Type', RN Seed}`, binary vector, or a paging message character vector. Standard PN types are `'PN9'`, `'PN15'`, `'PN23'`, `'PN9-ITU'`, and `'PN11'`. Paging message options include `'PagingMessage1'`, `'PagingMessage2'`, and `'PagingMessage3'`.	Data source. Specify a standard PN sequence with a random number seed, a binary vector, or one of three paging messages. For a description of paging message contents see footnote 1.
When the `DataSource` enumeration specifies one of the paging message options, simulated paging message data is used as input to the F-PCH physical channel: `'PagingMessage1'` — Streams a 7680 bit sequence (800 ms at fullrate) of paging message contents onto the channel that includes the General Page Message, the CDMA Channel List Message, the Extended System Parameter Message, the Extended Neighbor List Message, the System Parameter Message, and the Access Parameter Message. The paging message repeats these messages in a nonsequential pattern. `'PagingMessage2'` — Streams a 2304 bit sequence (240 ms at fullrate) of paging message contents onto the channel that includes a truncated version of the full `'PagingMessage1'` content. `'PagingMessage3'` — Streams an 864 bit sequence (90 ms at fullrate) of paging message contents onto the channel that includes the Neighbor List Message, the CDMA Channel List Message, the General Page Message, the System Parameter Message, and the Access Parameter Message. The paging message repeats these messages in a sequential pattern. For more information on the F-PCH contents, refer to 3GPP2 C.S0004, Table 3.1.2.3.1.1.2–1.

FCCCH Substructure

Include the FCCCH substructure in the cfg structure to configure the forward common control channel (F-CCCH). The FCCCH substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'`\| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)
`DataRate`	`9600` \| `19200` \| `38400`	Data rate (bps)
`FrameLength`	`5` \| `10` \| `20`	Frame length (ms)
`CodingType`	`'conv'` \| `'turbo'`	Type of error correction coding
`WalshCode`	Nonnegative integer scalar such that 0 ≤ `WalshCode` ≤ 255	Walsh code number
`LongCodeMask`	Positive scalar integer	Long code identifier
`EnableCoding`	`'On'` \| `'Off'`	Enable or disable channel coding
`DataSource`	Cell array: `{'PN Type', RN Seed}` or binary vector. Standard PN sequence options are `'PN9'`, `'PN15'`, `'PN23'`, `'PN9-ITU'`, and `'PN11'`.	Data source. Specify a standard PN sequence with a random number seed or a custom vector.

FCACH Substructure

Include the FCACH substructure in the cfg structure to configure the forward common assignment channel (F-CACH). The FCACH substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'` \| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)
`CodingType`	`'conv'` \| `'turbo'`	Type of error correction coding
`WalshCode`	Nonnegative integer scalar such that 0 ≤ `WalshCode` ≤ 255	Walsh code number
`LongCodeMask`	Positive scalar integer	Long code identifier
`EnableCoding`	`'On'` \| `'Off'`	Enable or disable channel coding
`DataSource`	Cell array: `{'PN Type', RN Seed}` or binary vector. Standard PN sequence options are `'PN9'`, `'PN15'`, `'PN23'`, `'PN9-ITU'`, and `'PN11'`.	Data source. Specify a standard PN sequence with a random number seed or a custom vector.

FQPCH Substructure

Include the FQPCH substructure in the cfg structure to configure the forward quick paging channel (F-QPCH). The FQPCH substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'` \| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)
`DataRate`	`2400` \| `4800`	Data rate (bps)
`WalshCode`	Nonnegative integer scalar such that 0 ≤ `WalshCode` ≤ 255	Walsh code number
`LongCodeMask`	Positive scalar integer	Long code identifier
`EnableCoding`	`'On'` \| `'Off'`	Enable or disable channel coding
`DataSource`	Cell array: `{'PN Type', RN Seed}` or binary vector. Standard PN sequence options are `'PN9'`, `'PN15'`, `'PN23'`, `'PN9-ITU'`, and `'PN11'`.	Data source. Specify a standard PN sequence with a random number seed or a custom vector.

FCPCCH Substructure

Include the FCPCCH substructure in the cfg structure to configure the forward common power control channel (F-CPCCH). The FCPCCH substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'` \| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)
`WalshCode`	Nonnegative integer scalar such that 0 ≤ `WalshCode` ≤ 63	Walsh code number
`LongCodeMask`	Positive scalar integer	Long code identifier
`EnableCoding`	`'On'` \| `'Off'`	Enable or disable channel coding
`DataSource`	Cell array: `{'PN Type', RN Seed}` or binary vector. Standard PN sequence options are `'PN9'`, `'PN15'`, `'PN23'`, `'PN9-ITU'`, and `'PN11'`.	Data source. Specify a standard PN sequence with a random number seed or a custom vector.

FBCCH Substructure

Include the FBCCH substructure in the cfg structure to configure the forward broadcast control channel (F-BCCH). The FBCCH substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'` \| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)
`DataRate`	`4800` \| `9600` \| `19200`	Data rate (bps)
`CodingType`	`'conv'` \| `'turbo'`	Type of error correction coding
`WalshCode`	Nonnegative integer scalar such that 0 ≤ `WalshCode` ≤ 127	Walsh code number
`LongCodeMask`	Positive scalar integer	Long code identifier
`EnableCoding`	`'On'` \| `'Off'`	Enable or disable channel coding
`DataSource`	Cell array: `{'PN Type', RN Seed}` or binary vector. Standard PN sequence options are `'PN9'`, `'PN15'`, `'PN23'`, `'PN9-ITU'`, and `'PN11'`.	Data source. Specify a standard PN sequence with a random number seed or a custom vector.

FFCH Substructure

Include the FFCH substructure in the cfg structure to configure the forward fundamental traffic channel (F-FCH). The FFCH substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'` \| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)
`RadioConfiguration`	`'RC1'` through `'RC9'`	Radio configuration channel
`DataRate`	`1200` \| `1500` \| `1800` \| `2400` \| `2700` \| `3600` \| `4800` \| `7200` \| `9600` \| `14400`	Data rate (bps)
`FrameLength`	`5` \| `10` \| `20`	Frame length (ms)
`WalshCode`	Nonnegative integer scalar such that 0 ≤ `WalshCode` ≤ 255	Walsh code number
`LongCodeMask`	Positive scalar integer	Long code identifier
`EnableQOF`	`'On'` \| `'Off'`	Enable QOF spreading
`EnableCoding`	`'On'` \| `'Off'`	Enable or disable channel coding
`DataSource`	Cell array: `{'PN Type', RN Seed}` or binary vector. Standard PN sequence options are `'PN9'`, `'PN15'`, `'PN23'`, `'PN9-ITU'`, and `'PN11'`.	Data source. Specify a standard PN sequence with a random number seed or a custom vector.
`PowerControlEnable`	`'On'` \| `'Off'`	Enable or disable power control subchannel
`PowerControlPower`	Real scalar	Power control subchannel power (relative to F-FCH)
`PowerControlDataSource`	Cell array: `{'PN Type', RN Seed}` or binary vector. Standard PN sequence options are `'PN9'`, `'PN15'`, `'PN23'`, `'PN9-ITU'`, and `'PN11'`.	Power control subchannel data source

FDCCH Substructure

Include the FDCCH substructure in the cfg structure to configure the forward dedicated control channel (F-DCCH). The FDCCH substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'` \| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)
`RadioConfiguration`	`'RC3'` through `'RC9'`	Radio configuration channel
`DataRate`	`9600` \| `14400`	Data rate (bps)
`FrameLength`	`5` \| `20`	Frame length (ms)
`WalshCode`	Nonnegative integer scalar such that 0 ≤ `WalshCode` ≤ 255	Walsh code number
`LongCodeMask`	Positive scalar integer	Long code identifier
`EnableQOF`	`'On'` \| `'Off'`	Enable QOF spreading
`EnableCoding`	`'On'` \| `'Off'`	Enable or disable channel coding
`DataSource`	Cell array: `{'PN Type', RN Seed}` or binary vector. Standard PN sequence options are `'PN9'`, `'PN15'`, `'PN23'`, `'PN9-ITU'`, and `'PN11'`.	Data source. Specify a standard PN sequence with a random number seed or a custom vector.

FSCCH Substructure

Include the FSCCH substructure in the cfg structure to configure the forward supplemental code channel (F-SCCH). The FSCCH substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'` \| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)
`RadioConfiguration`	`'RC1'` \| `'RC2'`	Radio configuration channel
`WalshCode`	Nonnegative integer scalar such that 0 ≤ `WalshCode` ≤ 255	Walsh code number
`LongCodeMask`	Positive scalar integer	Long code identifier
`EnableCoding`	`'On'` \| `'Off'`	Enable or disable channel coding
`DataSource`	Cell array: `{'PN Type', RN Seed}` or binary vector. Standard PN sequence options are `'PN9'`, `'PN15'`, `'PN23'`, `'PN9-ITU'`, and `'PN11'`.	Data source. Specify a standard PN sequence with a random number seed or a custom vector.

FSCH Substructure

Include the FSCH substructure in the cfg structure to configure the forward supplemental channel (F-SCH). The FSCH substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'` \| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)
`RadioConfiguration`	`'RC3'` \| `'RC4'` \| `'RC5'` \| `'RC6'` \| `'RC7'` \| `'RC8'` \| `'RC9'`	Radio configuration channel
`DataRate`	`1200` \| `1350` \| `1500` \| `1800` \| `2400` \| `2700` \| `3600` \| `4800` \| `7200` \| `9600` \| `14400` \| `19200` \| `28800` \| `38400` \| `57600` \| `76800` \| `115200` \| `153600` \| `230400` \| `307200`	Data rate (bps)
`FrameLength`	`20` \| `40` \| `80`	Frame length (ms)
`CodingType`	`'Conv'` \| `'Turbo'`	Channel coding type, convolutional or turbo
`WalshCode`	Nonnegative integer scalar such that 0 ≤ `WalshCode` ≤ 255	Walsh code number
`LongCodeMask`	Positive scalar integer	Long code identifier
`EnableQOF`	`'On'` \| `'Off'`	Enable QOF spreading
`EnableCoding`	`'On'` \| `'Off'`	Enable or disable channel coding
`DataSource`	Cell array: `{'PN Type', RN Seed}` or binary vector. Standard PN sequence options are `'PN9'`, `'PN15'`, `'PN23'`, `'PN9-ITU'`, and `'PN11'`.	Data source. Specify a standard PN sequence with a random number seed or a custom vector.

FOCNS Substructure

Include the FOCNS substructure in the cfg structure to configure orthogonal channel noise source information. The FOCNS substructure contains these fields.

Parameter Field	Values	Description
`Enable`	`'On'` \| `'Off'`	Enable or disable the channel
`Power`	Real scalar	Relative channel power (dB)
`WalshLength`	`64` \| `128` \| `256`	Walsh code length
`WalshCode`	Nonnegative integer scalar such that 0 ≤ `WalshCode` ≤ `WalshLength` – 1	Walsh code number

References

[1] 3GPP2 C.S0002–F v2.0. “Physical Layer Standard for cdma2000 Spread Spectrum Systems.” 3rd Generation Partnership Project 2.

[2] 3GPP2 C.S0010–C v2.0. “Recommended Minimum Performance Standards for cdma2000 Spread Spectrum Base Stations.” 3rd Generation Partnership Project 2.

[3] 3GPP2 C.S0004–F v1.0. “Signaling Link Access Control (LAC) Standard for cdma2000 Spread Spectrum Systems.” 3rd Generation Partnership Project 2.

Version History

Introduced in R2015b

cdma2000ForwardReferenceChannels

Syntax

Description

Examples

Generate Waveform for RC2 Forward Traffic Channels

Generate CDMA200 Waveform Containing Sync Channel Message

Generate F-CCCH Waveform

Generate Waveform for Base Station Testing

Generate F-SCH Waveform

Input Arguments

wv — Waveform identification character vector

numchips — Number of chips 1000 (default) | positive integer scalar

BSTM-RC — BSTM reference channel type 'BSTM-RC1' | 'BSTM-RC2' | 'BSTM-RC3' | 'BSTM-RC4' | 'BSTM-RC5' | 'BSTM-RC6' | 'BSTM-RC7' | 'BSTM-RC8' | 'BSTM-RC9'

P — Power budget allocated to traffic channels 0 (default) | real scalar

M — Number of traffic channels 6 (default) | positive integer scalar

traffic — Traffic configuration character vector

F-SCH-SPEC — Forward supplemental channel data rate and frame length character vector

Output Arguments

cfg — Configuration of the parameters and channels used by the waveform generator structure

Top-Level Parameters and Substructures

FPICH Substructure

FAPICH Substructure

FTDPICH Substructure

FATDPICH

FSYNC Substructure

SyncMessage Substructure

FPCH Substructure

FCCCH Substructure

FCACH Substructure

FQPCH Substructure

FCPCCH Substructure

FBCCH Substructure

FFCH Substructure

FDCCH Substructure

FSCCH Substructure

FSCH Substructure

FOCNS Substructure

References

Version History

See Also

`wv` — Waveform identification
character vector

`numchips` — Number of chips
`1000` (default) | positive integer scalar

`BSTM-RC` — BSTM reference channel type
`'BSTM-RC1'` | `'BSTM-RC2'` | `'BSTM-RC3'` | `'BSTM-RC4'` | `'BSTM-RC5'` | `'BSTM-RC6'` | `'BSTM-RC7'` | `'BSTM-RC8'` | `'BSTM-RC9'`

`P` — Power budget allocated to traffic channels
`0` (default) | real scalar

`M` — Number of traffic channels
`6` (default) | positive integer scalar

`traffic` — Traffic configuration
character vector

`F-SCH-SPEC` — Forward supplemental channel data rate and frame length
character vector

`cfg` — Configuration of the parameters and channels used by the waveform generator
structure