Signal Monitoring and Parameter Tuning
Configure communication between the host and the target hardware. Simulink® model is deployed as a C code on the hardware.
You can generate optimized code for STM32 processors for real-time and interrupt-driven execution of code and perform real-time signal monitoring, parameter tuning, and processor-in-the-loop (PIL) testing with Embedded Coder®.
Topics
- Serial Configuration for Monitor & Tune and PIL for STM32 Processor-Based Boards
Configure your model to run in Monitor & Tune (External mode) and PIL for STM32 Processor-Based Boards.
- SoC Blockset Task Profiling
Use the SoC Blockset™ profiler to measure tasks on the STM processor.
- Use SoC Blockset Pass-Through Block Simulation
Use the SoC Blockset block pass through to add simulation to STM blocks.
- STM32CubeMX based PIL Execution at the Command Line Using MATLAB Coder
PIL Execution at Command Line for STM32CubeMX.
- STMCubeMX Based PIL Execution Using the MATLAB Coder App
PIL Execution with app.
- STM32CubeMX Configuration for Voltage Mode Control
Instructions for STM32CubeMX configuration.
- Debug Simulink Generated Code in STM32CubeIDE
Integrate Simulink generated code with STM32CubeIDE.
Featured Examples
Signal Monitoring and Parameter Tuning of Generated PWM Output
Use PWM Output block in a Simulink® model to generate PWM signals using Embedded Coder® Support Package for STMicroelectronics® STM32 Processors.
Signal Monitoring and Parameter Tuning Over XCP-based CAN Interface Using STM32 Processors
Monitor signals and tune parameters of a Simulink® model on STMicroelectronics® STM32 processor based board using XCP-based CAN Interface.
Monitoring and Tuning Using STMicroelectronics STM32 Processor Based Boards
Use Embedded Coder® Support Package for STMicroelectronics® STM32 Processors for Monitoring and Tuning simulations using STM32 processor based boards.
Getting Started with Hardware Profiling
Demonstrates how to perform real-time execution profiling of algorithms using the Embedded Coder® Support Package for STMicroelectronics® STM32 Processors. It covers two primary profiling methods:
MAT-file Logging on SD Card for STMicroelectronics STM32 Processors
Perform MAT-file logging using Simulink model on a Micro SD card mounted on an STMicroelectronics STM32 Discovery board.
