Measuring VCO Phase Noise to Compare with Target Profile
This example shows how to validate the phase noise profile of a VCO device under test (DUT) using a VCO Testbench.
Open the model
vcoPhaseNoise . The model consists of a VCO block and a VCO Testbench.
The voltage sensitivity of the VCO is set to
1.25e6 Hz, and the free running frequency is
The testbencch is set to measure the Phase noise metric of the VCO in the Measurement option. The
Control voltage provided to the input of VCO is
4 V. So, the VCO operates at
2.5 GHz frequency. Click the Autofill setup parameters button to automatically calculate the Resolution bandwidth (Hz), and No. of spectral averages.
Run simulation for
8e-4 s, as recommended in the Block Parameters dialog box. Double click the VCO Testbench block to open the Block Parameters dialog box. Click on the Plot measurement button.
The operating frequency matches the predicted frequency
2.5 GHz. The measured phase noise profile also matches the target profile.