fminunc
Find minimum of unconstrained multivariable function
Syntax
Description
Nonlinear programming solver.
Finds the minimum of a problem specified by
$$\underset{x}{\mathrm{min}}f(x)$$
where f(x) is a function that returns a scalar.
x is a vector or a matrix; see Matrix Arguments.
starts
at the point x
= fminunc(fun
,x0
)x0
and attempts to find a local minimum x
of
the function described in fun
. The point x0
can
be a scalar, vector, or matrix.
Note
Passing Extra Parameters explains how to pass extra parameters to the objective function and nonlinear constraint functions, if necessary.
fminunc
is for nonlinear problems without
constraints. If your problem has constraints, generally use fmincon
. See Optimization Decision Table.
minimizes x
= fminunc(fun
,x0
,options
)fun
with
the optimization options specified in options
.
Use optimoptions
to set these
options.
Examples
Minimize a Polynomial
Minimize the function $$f(x)=3{x}_{1}^{2}+2{x}_{1}{x}_{2}+{x}_{2}^{2}4{x}_{1}+5{x}_{2}$$.
To do so, write an anonymous function fun
that calculates the objective.
fun = @(x)3*x(1)^2 + 2*x(1)*x(2) + x(2)^2  4*x(1) + 5*x(2);
Call fminunc
to find a minimum of fun
near [1,1]
.
x0 = [1,1]; [x,fval] = fminunc(fun,x0)
Local minimum found. Optimization completed because the size of the gradient is less than the value of the optimality tolerance.
x = 1×2
2.2500 4.7500
fval = 16.3750
Supply Gradient
fminunc
can be faster and more reliable when you provide derivatives.
Write an objective function that returns the gradient as well as the function value. Use the conditionalized form described in Including Gradients and Hessians. The objective function is Rosenbrock's function,
$$f(x)=100{\left({x}_{2}{x}_{1}^{2}\right)}^{2}+(1{x}_{1}{)}^{2},$$
which has gradient
$$\nabla f(x)=\left[\begin{array}{c}400\left({x}_{2}{x}_{1}^{2}\right){x}_{1}2\left(1{x}_{1}\right)\\ 200\left({x}_{2}{x}_{1}^{2}\right)\end{array}\right]$$.
The code for the objective function with gradient appears at the end of this example.
Create options to use the objective function’s gradient. Also, set the algorithm to 'trustregion'
.
options = optimoptions('fminunc','Algorithm','trustregion','SpecifyObjectiveGradient',true);
Set the initial point to [1,2
]. Then call fminunc
.
x0 = [1,2]; fun = @rosenbrockwithgrad; x = fminunc(fun,x0,options)
Local minimum found. Optimization completed because the size of the gradient is less than the value of the optimality tolerance.
x = 1×2
1.0000 1.0000
The following code creates the rosenbrockwithgrad
function, which includes the gradient as the second output.
function [f,g] = rosenbrockwithgrad(x) % Calculate objective f f = 100*(x(2)  x(1)^2)^2 + (1x(1))^2; if nargout > 1 % gradient required g = [400*(x(2)x(1)^2)*x(1)  2*(1x(1)); 200*(x(2)x(1)^2)]; end end
Use Problem Structure
Solve the same problem as in Supply Gradient using a problem structure instead of separate arguments.
Write an objective function that returns the gradient as well as the function value. Use the conditionalized form described in Including Gradients and Hessians. The objective function is Rosenbrock's function,
$$f(x)=100{\left({x}_{2}{x}_{1}^{2}\right)}^{2}+(1{x}_{1}{)}^{2}$$,
which has gradient
$$\nabla f(x)=\left[\begin{array}{c}400\left({x}_{2}{x}_{1}^{2}\right){x}_{1}2\left(1{x}_{1}\right)\\ 200\left({x}_{2}{x}_{1}^{2}\right)\end{array}\right]$$.
The code for the objective function with gradient appears at the end of this example.
Create options to use the objective function’s gradient. Also, set the algorithm to 'trustregion'
.
options = optimoptions('fminunc','Algorithm','trustregion','SpecifyObjectiveGradient',true);
Create a problem structure including the initial point x0 = [1,2]
. For the required fields in this structure, see problem.
problem.options = options;
problem.x0 = [1,2];
problem.objective = @rosenbrockwithgrad;
problem.solver = 'fminunc';
Solve the problem.
x = fminunc(problem)
Local minimum found. Optimization completed because the size of the gradient is less than the value of the optimality tolerance.
x = 1×2
1.0000 1.0000
The following code creates the rosenbrockwithgrad
function, which includes the gradient as the second output.
function [f,g] = rosenbrockwithgrad(x) % Calculate objective f f = 100*(x(2)  x(1)^2)^2 + (1x(1))^2; if nargout > 1 % gradient required g = [400*(x(2)x(1)^2)*x(1)2*(1x(1)); 200*(x(2)x(1)^2)]; end end
Obtain Optimal Objective Function Value
Find both the location of the minimum of a nonlinear function and the value of the function at that minimum. The objective function is
$$f(x)=x(1){e}^{{\Vert x\Vert}_{2}^{2}}+{\Vert x\Vert}_{2}^{2}/20$$.
fun = @(x)x(1)*exp((x(1)^2 + x(2)^2)) + (x(1)^2 + x(2)^2)/20;
Find the location and objective function value of the minimizer starting at x0 = [1,2]
.
x0 = [1,2]; [x,fval] = fminunc(fun,x0)
Local minimum found. Optimization completed because the size of the gradient is less than the value of the optimality tolerance.
x = 1×2
0.6691 0.0000
fval = 0.4052
Examine the Solution Process
Choose fminunc
options and outputs to examine the solution process.
Set options to obtain iterative display and use the 'quasinewton'
algorithm.
options = optimoptions(@fminunc,'Display','iter','Algorithm','quasinewton');
The objective function is
$$f(x)=x(1){e}^{{\Vert x\Vert}_{2}^{2}}+{\Vert x\Vert}_{2}^{2}/20.$$
fun = @(x)x(1)*exp((x(1)^2 + x(2)^2)) + (x(1)^2 + x(2)^2)/20;
Start the minimization at x0 = [1,2]
, and obtain outputs that enable you to examine the solution quality and process.
x0 = [1,2]; [x,fval,exitflag,output] = fminunc(fun,x0,options)
Firstorder Iteration Funccount f(x) Stepsize optimality 0 3 0.256738 0.173 1 6 0.222149 1 0.131 2 9 0.15717 1 0.158 3 18 0.227902 0.438133 0.386 4 21 0.299271 1 0.46 5 30 0.404028 0.102071 0.0458 6 33 0.404868 1 0.0296 7 36 0.405236 1 0.00119 8 39 0.405237 1 0.000252 9 42 0.405237 1 7.97e07 Local minimum found. Optimization completed because the size of the gradient is less than the value of the optimality tolerance.
x = 1×2
0.6691 0.0000
fval = 0.4052
exitflag = 1
output = struct with fields:
iterations: 9
funcCount: 42
stepsize: 2.9343e04
lssteplength: 1
firstorderopt: 7.9721e07
algorithm: 'quasinewton'
message: 'Local minimum found....'
The exit flag
1
shows that the solution is a local optimum.The
output
structure shows the number of iterations, number of function evaluations, and other information.The iterative display also shows the number of iterations and function evaluations.
Use "lbfgs"
Hessian Approximation for Large Problem
When your problem has a large number of variables, the
default value of the HessianApproximation
can cause
fminunc
to use a large amount of memory and run slowly.
To use less memory and run faster, specify
HessianApproximation="lbfgs"
.
For example, if you attempt to minimize the multirosenbrock
function (listed below) with 1e5 variables using the default parameters,
fminunc
issues an error.
N = 1e5; x0 = 2*ones(N,1); x0(2:2:N) = 2; [x,fval] = fminunc(@multirosenbrock,x0)
Error using eye Requested 100000x100000 (74.5GB) array exceeds maximum array size preference (63.9GB). This might cause MATLAB to become unresponsive. Error in optim.internal.fminunc.AbstractDenseHessianApproximation (line 21) this.Value = eye(nVars); Error in optim.internal.fminunc.BFGSHessianApproximation (line 14) this = this@optim.internal.fminunc.AbstractDenseHessianApproximation(nVars); Error in fminusub (line 73) HessApprox = optim.internal.fminunc.BFGSHessianApproximation(sizes.nVar); Error in fminunc (line 488) [x,FVAL,GRAD,HESSIAN,EXITFLAG,OUTPUT] = fminusub(funfcn,x, ...
To solve this problem, set the HessianApproximation
option to "lbfgs"
. To speed the solution, set options to
use the supplied gradient.
N = 1e5; x0 = 2*ones(N,1); x0(2:2:N) = 2; options = optimoptions("fminunc",HessianApproximation="lbfgs",... SpecifyObjectiveGradient=true); [x,fval] = fminunc(@multirosenbrock,x0,options);
Local minimum found. Optimization completed because the size of the gradient is less than the value of the optimality tolerance.
The theoretical solution is x(i) = 1
for all
i
. Check the accuracy of the returned
solution.
max(abs(x1))
ans = 1.3795e04
This code creates the multirosenbrock
function.
function [f,g] = multirosenbrock(x) % Get the problem size n = length(x); if n == 0, error('Input vector, x, is empty.'); end if mod(n,2) ~= 0 error('Input vector, x ,must have an even number of components.'); end % Evaluate the vector function odds = 1:2:n; evens = 2:2:n; F = zeros(n,1); F(odds,1) = 1x(odds); F(evens,1) = 10.*(x(evens)x(odds).^2); f = sum(F.^2); if nargout >= 2 % Calculate gradient g = zeros(n,1); g(evens) = 200*(x(evens)x(odds).^2); g(odds) = 2*(1  x(odds))  400*(x(evens)x(odds).^2).*x(odds); end end
Input Arguments
fun
— Function to minimize
function handle  function name
Function to minimize, specified as a function handle or function
name. fun
is a function that accepts a vector or
array x
and returns a real scalar f
,
the objective function evaluated at x
.
fminunc
passes x
to your objective function in the shape of the x0
argument. For example, if x0
is a 5by3 array, then fminunc
passes x
to fun
as a 5by3 array.
Specify fun
as a function handle for a file:
x = fminunc(@myfun,x0)
where myfun
is a MATLAB^{®} function such
as
function f = myfun(x) f = ... % Compute function value at x
You can also specify fun
as a function handle
for an anonymous function:
x = fminunc(@(x)norm(x)^2,x0);
If you can compute the gradient of fun
and the SpecifyObjectiveGradient
option is set to true
, as set
by
options = optimoptions('fminunc','SpecifyObjectiveGradient',true)
fun
must return the gradient vector
g(x)
in the second output argument.
If you can also compute the Hessian matrix and the HessianFcn
option
is set to 'objective'
via options = optimoptions('fminunc','HessianFcn','objective')
and the Algorithm
option
is set to 'trustregion'
, fun
must
return the Hessian value H(x)
, a symmetric matrix,
in a third output argument. fun
can give a sparse
Hessian. See Hessian for fminunc trustregion or fmincon trustregionreflective algorithms for
details.
The trustregion
algorithm allows you to
supply a Hessian multiply function. This function gives the result
of a Hessiantimesvector product without computing the Hessian directly.
This can save memory. See Hessian Multiply Function.
Example: fun = @(x)sin(x(1))*cos(x(2))
Data Types: char
 function_handle
 string
x0
— Initial point
real vector  real array
Initial point, specified as a real vector or real array. Solvers use the number of elements in
x0
and the size of x0
to determine the number
and size of variables that fun
accepts.
Example: x0 = [1,2,3,4]
Data Types: double
options
— Optimization options
output of optimoptions
 structure such as optimset
returns
Optimization options, specified as the output of optimoptions
or
a structure such as optimset
returns.
Some options apply to all algorithms, and others are relevant for particular algorithms. See Optimization Options Reference for detailed information.
Some options are absent from the
optimoptions
display. These options appear in italics in the following
table. For details, see View Optimization Options.
All Algorithms  
 Choose the The 
CheckGradients  Compare usersupplied derivatives (gradient of objective) to
finitedifferencing derivatives. Choices are
For
The 
Diagnostics  Display diagnostic information
about the function to be minimized or solved. Choices are 
DiffMaxChange  Maximum change in variables for
finitedifference gradients (a positive scalar). The default is 
DiffMinChange  Minimum change in variables for
finitedifference gradients (a positive scalar). The default is 
Display  Level of display (see Iterative Display):

FiniteDifferenceStepSize  Scalar or vector step size factor for finite differences. When
you set
sign′(x) = sign(x) except sign′(0) = 1 .
Central finite differences are
FiniteDifferenceStepSize expands to a vector. The default
is sqrt(eps) for forward finite differences, and eps^(1/3)
for central finite differences.The
trustregion algorithm uses For 
FiniteDifferenceType  Finite differences, used to estimate
gradients, are either For 
FunValCheck  Check whether objective function
values are valid. The default setting, 
MaxFunctionEvaluations  Maximum number of function evaluations allowed, a nonnegative
integer. The default value is
For 
MaxIterations  Maximum number of iterations allowed, a nonnegative integer. The
default value is For 
OptimalityTolerance  Termination tolerance on the firstorder optimality (a
nonnegative scalar). The default is For 
OutputFcn  Specify one or more userdefined functions that an optimization
function calls at each iteration. Pass a function handle
or a cell array of function handles. The default is none
( 
PlotFcn  Plots various measures of progress while the algorithm executes;
select from predefined plots or write your own. Pass a
builtin plot function name, a function handle, or a
cell array of builtin plot function names or function
handles. For custom plot functions, pass function
handles. The default is none
(
Custom plot functions use the same syntax as output functions. See Output Functions for Optimization Toolbox and Output Function and Plot Function Syntax. For

SpecifyObjectiveGradient  Gradient for the objective function
defined by the user. See the description of For 
StepTolerance  Termination tolerance on For 
TypicalX  Typical The 
trustregion Algorithm  
FunctionTolerance  Termination tolerance on the function value, a nonnegative
scalar. The default is For 
HessianFcn  If set to If set to For 
HessianMultiplyFcn  Hessian multiply function, specified as a function handle. For
largescale structured problems, this function computes
the Hessian matrix product W = hmfun(Hinfo,Y) where
The first
argument is the same as the third argument returned by
the objective function [f,g,Hinfo] = fun(x)
Note To use the For an example, see Minimization with Dense Structured Hessian, Linear Equalities. For 
HessPattern  Sparsity pattern of the Hessian
for finite differencing. Set Use When the structure is unknown,
do not set 
MaxPCGIter  Maximum number of preconditioned
conjugate gradient (PCG) iterations, a positive scalar. The default
is 
PrecondBandWidth  Upper bandwidth of preconditioner
for PCG, a nonnegative integer. By default, 
SubproblemAlgorithm  Determines how the iteration step
is calculated. The default, 
TolPCG  Termination tolerance on the PCG
iteration, a positive scalar. The default is 
quasinewton Algorithm  
HessianApproximation  Specifies how
The choice For Note Usually, the 
ObjectiveLimit  A tolerance (stopping criterion)
that is a scalar. If the objective function value at an iteration
is less than or equal to 
UseParallel  When 
Example: options = optimoptions('fminunc','SpecifyObjectiveGradient',true)
problem
— Problem structure
structure
Problem structure, specified as a structure with the following fields:
Field Name  Entry 

 Objective function 
 Initial point for x 
 'fminunc' 
 Options created with optimoptions 
Data Types: struct
Output Arguments
x
— Solution
real vector  real array
Solution, returned as a real vector or real array. The size
of x
is the same as the size of x0
.
Typically, x
is a local solution to the problem
when exitflag
is positive. For information on
the quality of the solution, see When the Solver Succeeds.
fval
— Objective function value at solution
real number
Objective function value at the solution, returned as a real
number. Generally, fval
= fun(x)
.
exitflag
— Reason fminunc
stopped
integer
Reason fminunc
stopped, returned as an
integer.
 Magnitude of gradient is smaller than the 
 Change in 
 Change in the objective function value was less than
the 
 Predicted decrease in the objective function was less
than the 
 Number of iterations exceeded 
 Algorithm was terminated by the output function. 
 Objective function at current iteration went below 
output
— Information about the optimization process
structure
Information about the optimization process, returned as a structure with fields:
iterations  Number of iterations taken 
funcCount  Number of function evaluations 
firstorderopt  Measure of firstorder optimality 
algorithm  Optimization algorithm used 
cgiterations  Total number of PCG iterations ( 
lssteplength  Size of line search step relative to search direction
( 
stepsize  Final displacement in 
message  Exit message 
grad
— Gradient at the solution
real vector
Gradient at the solution, returned as a real vector. grad
gives
the gradient of fun
at the point x(:)
.
hessian
— Approximate Hessian
real matrix
Approximate Hessian, returned as a real matrix. For the meaning of
hessian
, see Hessian Output.
If the HessianApproximation
option is
"lbfgs"
or {"lbfgs" n}
then the
returned hessian
is []
.
Data Types: double
More About
Enhanced Exit Messages
The next few items list the possible enhanced exit messages from
fminunc
. Enhanced exit messages give a link for more
information as the first sentence of the message.
Local Minimum Found
The solver located a point that seems to be a local minimum, since the FirstOrder Optimality Measure is less than the OptimalityTolerance tolerance.
For suggestions on how to proceed, see When the Solver Succeeds.
Initial Point is a Local Minimum
The initial point seems to be a local minimum because the FirstOrder Optimality Measure is less than the OptimalityTolerance tolerance.
For suggestions on how to proceed, see Final Point Equals Initial Point.
Local Minimum Possible
The solver may have reached a local minimum, but cannot be certain because the FirstOrder Optimality Measure is not less than the OptimalityTolerance tolerance.
For suggestions on how to proceed, see Local Minimum Possible.
Solver Stopped Prematurely
The solver stopped because it reached a limit on the number of iterations or function evaluations before it minimized the objective to the requested tolerance.
For suggestions on how to proceed, see Too Many Iterations or Function Evaluations.
Problem Appears Unbounded
The solver reached a feasible point whose objective function value was less than or equal to the ObjectiveLimit
tolerance. The problem is unbounded, or poorly scaled, or the ObjectiveLimit
option is too high.
For suggestions on how to proceed, see Problem Unbounded.
Conflict
The 'trustregion'
algorithm requires that you provide a
gradient in the objective function and set the
SpecifyObjectiveGradient
option to
true
.
To proceed, do one of the following:
Set the
Algorithm
option to'quasinewton'
.Ensure that your objective function provides a gradient and set the
SpecifyObjectiveGradient
option totrue
. See Including Gradients and Hessians.
Definitions for Exit Messages
The next few items contain definitions for terms in the fminunc
exit messages.
tolerance
Generally, a tolerance is a threshold which, if crossed, stops the iterations of a solver. For more information on tolerances, see Tolerances and Stopping Criteria.
local minimum
A local minimum of a function is a point where the function value is smaller than at nearby points, but possibly greater than at a distant point.
A global minimum is a point where the function value is smaller than at all other feasible points.
Solvers try to find a local minimum. The result can be a global minimum. For more information, see Local vs. Global Optima.
FirstOrder Optimality Measure
The firstorder optimality measure is the maximum of the absolute value of the components of the gradient vector (also known as the infinity norm of the gradient). This should be zero at a minimizing point.
For more information, see FirstOrder Optimality Measure.
Size Of the Gradient
The size of the gradient is the maximum of the absolute value of the components of the gradient vector (also known as the infinity norm). This should be zero at a minimizing point.
For more information, see FirstOrder Optimality Measure.
OptimalityTolerance
The tolerance called OptimalityTolerance
relates to the
firstorder optimality measure. Iterations end when the firstorder optimality
measure is less than OptimalityTolerance
.
The firstorder optimality measure of an unconstrained problem is the maximum of the absolute value of the components of the gradient vector (also known as the infinity norm of the gradient). This should be zero at a minimizing point.
For more information, see FirstOrder Optimality Measure.
FunctionTolerance
FunctionTolerance
is a tolerance for the size of
the latest change in objective function value.
StepTolerance
StepTolerance
is a tolerance for the size of
the last step, meaning the size of the change in location where the objective
function was evaluated.
Norm of Current Step
The norm of the current step is the size of the change in location where the objective function was evaluated.
For more information, see Tolerances and Stopping Criteria.
Objective Limit
The solver reached a feasible point whose objective function value was less than or equal to the ObjectiveLimit
tolerance. The problem is unbounded, or poorly scaled, or the ObjectiveLimit
option is too high.
For suggestions on how to proceed, see Problem Unbounded.
Line Search Interval
The line search interval is the line segment along the search direction in which the solver attempts to minimize the objective function. If this interval is too small, the solver exits. The solver calculates the search direction and the size of this interval according to various algorithms described in Unconstrained Nonlinear Optimization Algorithms.
Output or Plot Function
An output function (or plot function) is evaluated once per iteration of a solver. It can report many optimization quantities during the course of a solver's progress, and can halt the solver.
For more information, see Output Functions for Optimization Toolbox or Plot Functions.
MaxIterations
MaxIterations
is a tolerance on the number of iterations the solver performs. When the solver has taken MaxIterations
iterations, the iterations end.
For more information, see Iterations and Function Counts or Tolerances and Stopping Criteria.
MaxFunctionEvaluations
MaxFunctionEvaluations
is a tolerance on the number of points where the solver evaluates the objective and/or constraint functions. When the solver has evaluated functions at MaxFunctionEvaluations
points, the iterations end.
For more information, see Iterations and Function Counts or Tolerances and Stopping Criteria.
Search Direction
The search direction is the vector from the current point along which the solver looks for an improvement. Optimization Toolbox™ solvers compute search directions via various algorithms, described in Unconstrained Nonlinear Optimization Algorithms.
Algorithms
QuasiNewton Algorithm
By default, the quasinewton
algorithm uses the BFGS QuasiNewton method
with a cubic line search procedure. This quasiNewton method uses the BFGS ([1],[5],[8], and [9]) formula for updating the approximation of
the Hessian matrix. You can also specify the lowmemory BFGS algorithm
("lbfgs"
) as the HessianApproximation
option. While not recommended, you can specify the DFP ([4],[6], and [7]) formula, which approximates the inverse Hessian matrix, by setting
the option to 'dfp'
. You can specify a steepest descent method by
setting the option to 'steepdesc'
, although this setting is
usually inefficient. See fminunc quasinewton Algorithm.
Trust Region Algorithm
The trustregion
algorithm requires that
you supply the gradient in fun
and
set SpecifyObjectiveGradient
to true
using optimoptions
. This algorithm is a subspace
trustregion method and is based on the interiorreflective Newton
method described in [2] and [3]. Each iteration involves the approximate
solution of a large linear system using the method of preconditioned
conjugate gradients (PCG). See fminunc trustregion Algorithm, TrustRegion Methods for Nonlinear Minimization and Preconditioned Conjugate Gradient Method.
Alternative Functionality
App
The Optimize Live Editor task provides a visual interface for fminunc
.
References
[1] Broyden, C. G. “The Convergence of a Class of DoubleRank Minimization Algorithms.” Journal Inst. Math. Applic., Vol. 6, 1970, pp. 76–90.
[2] Coleman, T. F. and Y. Li. “An Interior, Trust Region Approach for Nonlinear Minimization Subject to Bounds.” SIAM Journal on Optimization, Vol. 6, 1996, pp. 418–445.
[3] Coleman, T. F. and Y. Li. “On the Convergence of Reflective Newton Methods for LargeScale Nonlinear Minimization Subject to Bounds.” Mathematical Programming, Vol. 67, Number 2, 1994, pp. 189–224.
[4] Davidon, W. C. “Variable Metric Method for Minimization.” A.E.C. Research and Development Report, ANL5990, 1959.
[5] Fletcher, R. “A New Approach to Variable Metric Algorithms.” Computer Journal, Vol. 13, 1970, pp. 317–322.
[6] Fletcher, R. “Practical Methods of Optimization.” Vol. 1, Unconstrained Optimization, John Wiley and Sons, 1980.
[7] Fletcher, R. and M. J. D. Powell. “A Rapidly Convergent Descent Method for Minimization.” Computer Journal, Vol. 6, 1963, pp. 163–168.
[8] Goldfarb, D. “A Family of Variable Metric Updates Derived by Variational Means.” Mathematics of Computing, Vol. 24, 1970, pp. 23–26.
[9] Shanno, D. F. “Conditioning of QuasiNewton Methods for Function Minimization.” Mathematics of Computing, Vol. 24, 1970, pp. 647–656.
Extended Capabilities
Automatic Parallel Support
Accelerate code by automatically running computation in parallel using Parallel Computing Toolbox™.
To run in parallel, set the 'UseParallel'
option to true
.
options = optimoptions('
solvername
','UseParallel',true)
For more information, see Using Parallel Computing in Optimization Toolbox.
Version History
Introduced before R2006aR2023b: CheckGradients
option will be removed
The CheckGradients
option will be removed in a future release. To check the first derivatives of objective functions or nonlinear constraint functions, use the checkGradients
function.
MATLAB Command
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
 América Latina (Español)
 Canada (English)
 United States (English)
Europe
 Belgium (English)
 Denmark (English)
 Deutschland (Deutsch)
 España (Español)
 Finland (English)
 France (Français)
 Ireland (English)
 Italia (Italiano)
 Luxembourg (English)
 Netherlands (English)
 Norway (English)
 Österreich (Deutsch)
 Portugal (English)
 Sweden (English)
 Switzerland
 United Kingdom (English)