Get Started with Phased Array System Toolbox
Phased Array System Toolbox™ provides algorithms and apps in MATLAB® and Simulink® for designing and simulating sensor array and beamforming systems in wireless communication, radar, sonar, and acoustic applications. You can model and analyze the behavior of active and passive arrays, including subarrays and arbitrary geometries. You can also generate C code from the functions in the toolbox.
For 5G and LTE cellular, SATCOM, and WLAN communications systems, you can design multibeam and electronically steerable antennas. The toolbox includes algorithms for simulating hybrid and full digital beamforming architectures for massive MIMO and millimeter wave systems. You can simulate multipath fading environments to test the performance of beamforming antenna arrays.
For radar, sonar, and acoustic system design, the toolbox includes algorithms for beamforming, space-time adaptive processing (STAP), direction of arrival (DOA) estimation, matched filtering, and image formation. The toolbox also provides continuous and pulsed waveforms that you can use to generate simulation test signals and simulate target echoes and interferences.
- Phased Array Gallery
Model and visualize a variety of antenna, microphone, and hydrophone array geometries with Phased Array System Toolbox™.
- Microphone ULA Array
Visualize a four-element ULA with cardioid microphone elements.
- Time-Delay Beamforming of Microphone ULA Array
Perform conventional time-delay beamforming with 10-element ULA.
- Visualization of Wideband Beamformer Performance
Plot responses of a microphone element and an array of microphone elements.
- Linear Frequency Modulated Pulse Waveforms
LFM pulse waveforms increase time-bandwidth product and improve target detection.
Phased Array Gallery
Microphone Array Applications
Antenna Array Applications
About Phased Array Systems
- System Overviews
Describes the common building blocks of Phased Array Systems.
- Standards and Conventions
This section introduces the concept of baseband signals and defines the local and global coordinate systems used in the toolbox.
- Units of Measure and Physical Constants
Phased Array System Toolbox uses the International System of Units (SI).
An introduction to Phased Arrays
An array refers to multiple sensors, arranged in some configuration, that act together to produce a desired sensor pattern. This video shows how you can electronically steer that pattern without having to physically move the array simply by adjusting the phase of the signals at each individual element.
What is beamforming?
This video shows how to control the shape and directionality of the gain pattern of an array of antenna elements by adjusting the amplitude and phase of each element. This makes it easier to detect targets in the presence of interference and clutter.
What is beamforming for communications?
Wireless communication systems like 5G and WiFi usually have to serve many users simultaneously and they have to deal with multiple paths between two radios when operating in a scattering rich environment. This video covers how multichannel beamforming and spatial diversity is used to overcome those issues.
What is beamforming for radar?
This video shows how to employ digital beamforming to improve radar systems. It shows how we can combine the use of sensor arrays with multiple RF chains to have more control over the shape and directionality of radar beams in order to maximize signal and minimize interference. It also allows for multiple independently steered beams from the same array.