Main Content

Gaussian Antenna as Approximation for Spiral Antenna

This example shows how a Gaussian antenna can approximate the radiation pattern of a spiral antenna. Spiral antennas are known for their wideband behavior and are often used in wideband communications. The Gaussian antenna approximation is widely used in the literature.

Create a spiral antenna using Antenna Toolbox™. The antenna is in the y-z plane and has inner and outer radii of 0.65 mm and 40 mm, respectively.

se = spiralArchimedean( ...
    InnerRadius=0.65e-3,OuterRadius=40e-3, ...

Compute the radiation pattern for the spiral antenna at an operating frequency of 4 GHz. Specify a range of azimuth angles from –90° to 90° and zero elevation. Normalize the pattern so that its maximum value is 0 dB.

fc = 4e9;
az = -90:0.5:90;

sePattern = pattern(se,fc,az,0, ...

sePatternNorm = sePattern - max(sePattern);

Use Phased Array System Toolbox™ to create a Gaussian element with the same beamwidth as the spiral antenna. Compute its radiation pattern, which is normalized by construction.

seBw = beamwidth(se,fc,az,0);
ge = phased.GaussianAntennaElement(Beamwidth=seBw);

gePattern = pattern(ge,fc,az,0, ...

Find the smallest positive azimuth angle at which the patterns differ by about 3 dB.

idx = find((abs(sePatternNorm.' - gePattern) >= 3) & (az' >= 0),1);
az3dB = az(idx);

Plot the patterns for the spiral and Gaussian antennas. Overlay the 3-dB points. The Gaussian antenna pattern matches the spiral antenna pattern well out to about 75 degrees and thus can be used as an excellent approximation of a spiral antenna.


xline([-az3dB az3dB],'--')
xlabel("Azimuth Angle, az (degrees)")
ylabel("Power (dB)")
legend("Spiral","Gaussian","3-dB Point")

See Also

| (Antenna Toolbox)