Set the data type of the signals emitted by an output port
#define MDL_SET_OUTPUT_PORT_DATA_TYPE void mdlSetOutputPortDataType(SimStruct *S, int_T port, DTypeId id)
SimStruct representing an S-Function block.
Index of an output port.
Data type ID.
The Simulink® engine calls this routine to set the data
port has an
inherited data type. The data type ID
id is the
proposed data type for this port. Data type IDs for the built-in data
types can be found in
The S-function must check whether the specified data type is a valid
data type for the specified port.
If it is a valid data type, a C MEX S-function sets the data
Otherwise, the S-function reports an error, using
. This method
is only valid for simulation. C MEX S-functions must enclose the method
#if defined(MATLAB_MEX_FILE) statement.
The S-function can also set the data types of other input and output ports if their data types have not been set. The engine reports an error if the S-function changes the data type of a port whose data type has been set.
If the block does not implement this method, the engine assumes that the block supports any data type and sets the output port data type to the specified value.
The engine calls this method until all output ports with inherited data types have their data types specified.