Configure your software-defined radio (SDR) as a preamble detector or energy detector to detect and capture specific signals from the air. You can specify standard-based or custom waveforms for detection. Use the captured data to analyze, simulate, test, and validate wireless systems.
|Capture signal of interest from the air upon detection (Since R2022a)
|Plot preamble detection signals for triggering (Since R2022a)
|Plot energy detection signals for triggering (Since R2023b)
|Transmit waveform using preamble or energy detector (Since R2022a)
|Stop transmission from preamble or energy detector (Since R2022a)