Note: This page has been translated by MathWorks. Click here to see

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Constellation demapping

`y = wlanConstellationDemap(sym,noiseVarEst,numBPSCS) `

`y = wlanConstellationDemap(sym,noiseVarEst,numBPSCS,demapType) `

`y = wlanConstellationDemap(sym,noiseVarEst,numBPSCS,phase) `

`y = wlanConstellationDemap(sym,noiseVarEst,numBPSCS,demapType,phase) `

demaps
the received input `y`

= wlanConstellationDemap(`sym`

,`noiseVarEst`

,`numBPSCS`

) `sym`

using the soft-decision approximate LLR
method for the specified number of coded bits per subcarrier per spatial stream
`numBPSCS`

. The received symbols must be generated with one
of these modulations:

BPSK, QPSK, 16QAM, or 64QAM, as per IEEE

^{®}802.11™-2012, Section 18.3.5.8256QAM, as per IEEE 802.11ac™-2012, Section 22.3.10.9.1

1024QAM, as per IEEE 802.11-16/0922r2

derotates
the symbols clockwise before demapping by the number of radians specified in
`y`

= wlanConstellationDemap(`sym`

,`noiseVarEst`

,`numBPSCS`

,`phase`

) `phase`

.