File Exchange

image thumbnail

RegularizeData3D

version 1.1.0.0 (645 KB) by Jamal
Produces a smooth surface from scattered 3D input data.

3K Downloads

Updated 05 Jun 2014

View License

RegularizeData3D is a modified version of GridFit from the Matlab File Exchange. RegularizeData3D does essentially the same thing, but is an attempt to overcome several shortcomings inherent in the design of the legacy code in GridFit.

* GridFit lacks cubic interpolation capabilities. Interpolation is necessary to map the scattered input data to locations on the output surface. The output surface is most likely nonlinear, so linear interpolation used in GridFit is a lousy approximation. Cubic interpolation accounts for surface curvature, which is especially beneficial when the output grid is coarse in x and y.

* GridFit's "smoothness" parameter was poorly defined and its methodology may have led to bad output data. In RegularizeData3D the smoothness parameter is actually the ratio of smoothness (flatness) to fidelity (goodness of fit) and is not affected by the resolution of the output grid.
Smoothness = 100 gives 100 times as much weight to smoothness (and produces a nearly flat output surface)
Smoothness = 1 gives equal weight to smoothness and fidelity (and results in noticeable smoothing)
Smoothness = 0.01 gives 100 times as much weight to fitting the surface to the scattered input data (and results in very little smoothing)
Smoothness = 0.001 is good for data with low noise. The input points nearly coincide with the output surface.

* GridFit didn't do a good job explaining what math it was doing; it just gave usage examples.

For a detailed explanation of "the math behind the magic" on a 3D dataset, see:
http://mathformeremortals.wordpress.com/2013/07/22/introduction-to-regularizing-3d-data-part-1-of-2/

and to apply the same principles to a 2D dataset see:
http://mathformeremortals.wordpress.com/2013/01/29/introduction-to-regularizing-with-2d-data-part-1-of-3/

Both of these links include Excel spreadsheets that break down the calculations step by step so that you can see how RegularizeData3D works. There are also very limited (and very slow!) Excel spreadsheet functions that do the same thing in 2D or 3D.

Cite As

Jamal (2021). RegularizeData3D (https://www.mathworks.com/matlabcentral/fileexchange/46223-regularizedata3d), MATLAB Central File Exchange. Retrieved .

MATLAB Release Compatibility
Created with R2014a
Compatible with any release
Platform Compatibility
Windows macOS Linux
Acknowledgements

Inspired by: Surface Fitting using gridfit

Inspired: regularizeNd

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!