Use Simulink to Deploy Motor Control Algorithms on an FPGA
Engineers are developing high frequency switching power electronics and motor control systems driven by complex algorithms. To implement such algorithms, engineers are considering System on Chip (SoC) devices, which gives them the familiarity of embedded processors and additional FPGA capabilities of parallelism and deterministic behavior.
In this session you will learn how to use Simulink to deploy motor control algorithms on a Xilinx Zynq UltraScale+ SoC device with minimal FPGA programming knowledge. Using a field-oriented control (FOC) algorithm as an example, we will demonstrate automatic C and HDL code generation for the ARM Cortex and FPGA fabric on the SoC device to drive a permanent magnet synchronous motor (PMSM). The Zynq SoC and PMSM are implemented in the Trenz Electronics Motor Control Development Kit.
- Model, Simulate, Test and Deploy the FOC algorithm onto Zynq UltraScale+ SoC Device.
- Explore and partition the design for ideal division of tasks between the ARM and FPGA.
- Automate deployment of the algorithm into reference frameworks for the processor and programmable logic.
About the Presenter
Raghu Sivakumar is a senior product marketing engineer at MathWorks for FPGA, ASIC and SoC Devices. He has been with MathWorks since 2018 and supports MATLAB and Simulink users across industries in the adoption of HDL Coder and HDL Verifier products. Prior to joining MathWorks he worked in the automotive industry as a vehicle software integration engineer. He has a master’s degree in embedded systems and controls from the University of Leicester.
Recorded: 26 Aug 2021
You can also select a web site from the following list
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.